{"product_id":"coda-resources-507055-galvanized-steel-nipple-1in-x-6in-sch-40","title":"Coda Resources 507055 Galvanized Steel Nipple 1in X 6in Sch 40","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CODA RESOURCES 507055 is a schedule 40 galvanized steel close nipple designed for threaded pipe assemblies in water, air, and decorative piping applications. Pre-cut to 6 inches thread-to-thread with a 1-inch nominal diameter, it arrives ready to install without additional cutting or threading. The pipe is hot-dip galvanized in a zinc bath for corrosion resistance. It carries NSF 61 certification and is lead-free, making it suitable for potable water systems where code compliance is required. Every unit has been hydrostatically tested and is manufactured to ASTM and ASME standards. Licensed plumbers, pipefitters, and contractors are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis nipple is suited for residential and light commercial plumbing, compressed air lines, and industrial pipe decor projects. Standard IPS threads allow direct connection to fittings, valves, and other threaded pipe components. At 1-inch nominal diameter, it fits common pipe runs where moderate flow capacity is needed. Its hot-dip galvanized finish holds up in exposed and semi-exposed environments. The 6-inch length covers short-run connections between fittings where a standard close or hex nipple would be too short.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSchedule 40 wall thickness for full-strength threaded connections\u003c\/li\u003e\n  \u003cli\u003eHot-dip galvanized zinc coating for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eNSF 61 certified and lead-free for potable water service\u003c\/li\u003e\n  \u003cli\u003eHydrostatically tested per ASTM and ASME standards\u003c\/li\u003e\n  \u003cli\u003eStandard IPS threads for compatibility with common threaded fittings and valves\u003c\/li\u003e\n  \u003cli\u003ePre-cut thread-to-thread at 6 inches — no field cutting required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard IPS-threaded fittings, valves, and pipe components in water, air, and decorative piping systems. Compatible with other schedule 40 threaded components using 1-inch nominal IPS thread patterns.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed plumber or pipefitter in accordance with applicable local plumbing codes and the International Plumbing Code (IPC). Shut off and depressurize the line before making any threaded connections. Apply an approved thread sealant or PTFE tape to male threads before assembly — do not overtighten, as schedule 40 steel threads can crack fittings if excessive force is used. Verify that the intended application is within the pressure and temperature ratings allowed by local code for galvanized steel pipe.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNominal Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength (Thread to Thread)\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 1.31 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 1.31 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Galvanized Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSchedule\u003c\/strong\u003e: 40\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Type\u003c\/strong\u003e: Standard IPS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertification\u003c\/strong\u003e: NSF 61, Lead-Free, ASTM, ASME\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTesting\u003c\/strong\u003e: Hydrostatically tested\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Hot-dip zinc galvanized\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CODA RESOURCES\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 507055\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CODA RESOURCES","offers":[{"title":"Default Title","offer_id":51525183996210,"sku":"507055","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f8aea8c325723a11b72f0705aac6a5ec_49d34ec6-2770-4fe3-9128-00362b53ca8f.jpg?v=1785466570","url":"https:\/\/voomisupply.com\/products\/coda-resources-507055-galvanized-steel-nipple-1in-x-6in-sch-40","provider":"Voomi Supply","version":"1.0","type":"link"}