{"product_id":"cleveland-c73419-jobber-drill-bit-23-64-in-hss","title":"Cleveland C73419 Jobber Drill Bit 23\/64 in Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe CLEVELAND C73419 is a jobber-length twist drill bit designed for accurate, clean-entry drilling in metal and general trade applications. Built from high speed steel (HSS) with a bright, uncoated finish, the bit delivers consistent performance without the added cost of specialty coatings. The 118-degree split point reduces walking on entry and lowers feed pressure at the start of a cut. At 4-7\/8 inches overall length with a 3-1\/2 inch flute length, it fits standard drill chucks and magnetic-base drill setups. It is suited for HVAC sheet metal work, plumbing rough-in drilling, and general mechanical trade use where a reliable, general-purpose bit is needed.\u003c\/p\u003e\u003cp\u003eThis bit is sized at 23\/64 inch (0.3594 inch decimal) with a straight-cylindrical shank of matching diameter, making it compatible with keyed and keyless chucks across corded drills, drill presses, and magnetic drill units. The web-thinned, tapered web construction reduces thrust requirements and improves chip clearance in deeper holes. It carries a NAS 907 Type A designation, indicating it meets aerospace and heavy-duty industrial dimensional and tolerance standards. Primary listed workpiece material is aluminum, though the bit is appropriate for use across a broad range of non-hardened metals and plastics common in trade work.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e23\/64 inch (0.3594 inch) diameter with diameter tolerance of -0.0010 to 0.0000 inch for consistent hole sizing\u003c\/li\u003e\n\u003cli\u003e118-degree split point for reduced walking and lower entry thrust\u003c\/li\u003e\n\u003cli\u003eHigh speed steel construction rated for heavy-duty grade applications\u003c\/li\u003e\n\u003cli\u003eWeb-thinned, tapered web for improved chip evacuation and reduced feed force\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish suitable for aluminum and non-hardened metal drilling\u003c\/li\u003e\n\u003cli\u003eMeets NAS 907 Type A standard; 2-flute regular spiral, right-hand cut\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a direct-fit replacement or standard addition to jobber-length drill sets in trade and industrial environments. Straight-cylindrical shank fits all standard keyed and keyless chucks accepting bits up to 1\/2 inch shank diameter. Primary workpiece material listed is aluminum per manufacturer specs.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstall in a drill press or hand drill using a properly rated chuck; confirm the chuck jaws are fully tightened before operation. Always power down and unplug or de-energize the drill before changing bits. Use appropriate cutting fluid or lubricant when drilling through aluminum or steel to extend bit life and improve hole quality. Eye protection and secure workpiece clamping are required per standard shop safety practice.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size\u003c\/strong\u003e: 23\/64 inch (0.3594 inch decimal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4-7\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 3-1\/2 inches (3.5000 inch decimal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.3750 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.3594 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral (Regular)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\/Coating\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: -0.0010 to 0.0000 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Grade\u003c\/strong\u003e: Heavy Duty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: NAS 907 Type A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2228\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.6 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C73419\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51714371879218,"sku":"C73419","price":18.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f364efd6aec19afa2f91a820fcff892a_59e68669-1e0b-45c3-89b7-e40b75a9046f.jpg?v=1788500440","url":"https:\/\/voomisupply.com\/products\/cleveland-c73419-jobber-drill-bit-23-64-in-hss","provider":"Voomi Supply","version":"1.0","type":"link"}