{"product_id":"cleveland-c72197-jobber-length-drill-bit-set-29-pc","title":"Cleveland C72197 Jobber Length Drill Bit Set 29 Pc","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C72197 is a 29-piece jobber length drill bit set covering sizes from 1\/16 inch (0.0625 inches) to 1\/2 inch (0.5 inches) in 1\/64-inch step increments. Each bit is manufactured from high-speed steel with an oxide finish for basic corrosion resistance and reduced friction during cutting. The 118-degree radial point is a general-purpose geometry suited to a wide range of materials. Straight shanks fit standard three-jaw drill chucks without adapters. This set is used in metalworking and multipurpose drilling applications by HVAC technicians, plumbers, electricians, and general tradespeople who need a complete fractional inch coverage in a single case.\u003c\/p\u003e\n\u003cp\u003eThe C72197 set belongs to the Cleveland Series 2001G CLE-MAX product line and is intended for general-purpose hole-making in metal, plastic, and similar materials. The 29-bit sequence steps through every 1\/64-inch increment from 1\/16 to 1\/2 inch, giving a technician coverage for tapping prep, anchor pilot holes, sheet metal work, and panel knockouts. The bits are stored in a metal case that indexes each size for quick identification on the job. Right-hand cutting direction is standard for conventional drill press and handheld drill driver use.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e29-piece fractional set spanning 0.0625 to 0.5 inches in 1\/64-inch steps\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel construction for general-purpose metalworking and multipurpose drilling\u003c\/li\u003e\n  \u003cli\u003e118-degree radial point geometry for broad material compatibility\u003c\/li\u003e\n  \u003cli\u003eOxide finish reduces surface friction and provides light corrosion protection\u003c\/li\u003e\n  \u003cli\u003eStraight shank fits standard drill chucks with no adapter required\u003c\/li\u003e\n  \u003cli\u003eIndexed metal storage case keeps bits organized and protects cutting edges\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard three-jaw drill chucks on handheld drill drivers and benchtop or floor-standing drill presses. Suitable for metalworking and multipurpose drilling applications as described in UNSPSC category 27112800.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eDrill bit sets of this type are installed and used by licensed trades and general technicians working on metal fabrication, panel work, and structural prep. Secure the workpiece before drilling and confirm chuck jaws are fully tightened on the straight shank before operating. For metalworking applications, use appropriate cutting fluid or lubricant to extend bit life and manage heat buildup. Follow applicable workplace safety standards and wear eye protection during all drilling operations.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2001G CLE-MAX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Pieces\u003c\/strong\u003e: 29\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Drill Bit Size\u003c\/strong\u003e: 0.0625 inches (1\/16 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drill Bit Size\u003c\/strong\u003e: 0.5 inches (1\/2 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStep Increments\u003c\/strong\u003e: 1\/64 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Radial\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Application\u003c\/strong\u003e: Metalworking and Multipurpose Drilling\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStorage Unit Type\u003c\/strong\u003e: Metal Case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.025 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C72197\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":52124330000690,"sku":"C72197","price":268.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3f1e471f25cefac86b9ff7118a479f44.jpg?v=1790086736","url":"https:\/\/voomisupply.com\/products\/cleveland-c72197-jobber-length-drill-bit-set-29-pc","provider":"Voomi Supply","version":"1.0","type":"link"}