{"product_id":"cleveland-c72147-jobber-drill-bit-no-47-hss-118-deg","title":"Cleveland C72147 Jobber Drill Bit No. 47 Hss 118 Deg","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe CLEVELAND C72147 is a jobber-length drill bit sized to wire gauge No. 47, with a decimal diameter of 0.0785 inches. Made from high speed steel with a bright uncoated finish, this bit features a 118-degree standard point angle and a two-flute right-hand spiral configuration. The overall length is 2 inches, with a 1-inch flute length and a straight-cylindrical shank of 0.0785 inches in diameter. The web is thinned and tapered, which reduces thrust at entry and helps maintain point stability in small-diameter work. It is classified as a general purpose tool and conforms to ASME B94.11M and DIN 338 standards. Licensed trade professionals and production machinists are the primary users.\u003c\/p\u003e\u003cp\u003eThis drill bit is suited for general-purpose drilling in metal, plastic, and similar materials where a wire gauge No. 47 hole is required. The 4xD flute-to-diameter ratio supports chip evacuation in short, through-hole operations. Typical applications include tapping pre-drill work, instrument and electrical panel fabrication, and light fixture or enclosure assembly where small-diameter precision holes are needed. The right-hand cut and regular spiral are standard for most bench drill, hand drill, and CNC drilling operations in trade and production environments.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWire gauge No. 47 diameter: 0.0785 inches decimal equivalent\u003c\/li\u003e\n\u003cli\u003e118-degree standard point angle with web-thinned, tapered web for reduced entry thrust\u003c\/li\u003e\n\u003cli\u003eHigh speed steel construction with bright uncoated finish\u003c\/li\u003e\n\u003cli\u003eRight-hand cut, two-flute regular spiral for general-purpose use\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical shank at 0.0785 inches for standard chuck compatibility\u003c\/li\u003e\n\u003cli\u003eConforms to ASME B94.11M and DIN 338 standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose jobber-length drill bit for use in standard three-jaw drill chucks accepting a 0.0785-inch straight-cylindrical shank. Suitable for bench drill presses, hand drills, and CNC drilling setups configured for small-diameter wire gauge bits.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and use should be performed by a qualified machinist or trade professional familiar with small-diameter drill bit handling. Secure the shank fully in the chuck before operation and verify chuck runout is within tolerance, as small-diameter bits are sensitive to misalignment. Power down and de-energize the drill press or machine spindle completely before changing bits. Do not exceed the recommended feed rate for the material being drilled, as small-diameter high speed steel bits are susceptible to breakage under excessive lateral load.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Wire Gauge)\u003c\/strong\u003e: No. 47\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 0.0785 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\/Coating\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.0785 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute by Diameter Ratio\u003c\/strong\u003e: 4xD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: -0.0005 to 0.0000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2002G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ASME B94.11M, DIN 338\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification Designation\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C72147\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51714830041394,"sku":"C72147","price":40.03,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b3c70ead687b90fc34a0b12e1e685d56.jpg?v=1788506732","url":"https:\/\/voomisupply.com\/products\/cleveland-c72147-jobber-drill-bit-no-47-hss-118-deg","provider":"Voomi Supply","version":"1.0","type":"link"}