{"product_id":"cleveland-c72025-jobber-drill-bit-25-64-in-hss","title":"Cleveland C72025 Jobber Drill Bit 25\/64 in Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe CLEVELAND C72025 is a jobber-length twist drill bit designed for general-purpose drilling in metal, wood, and plastic. Built from high speed steel (HSS) with a bright uncoated finish, it delivers consistent cutting performance across a wide range of materials. The bit features a 118-degree standard point angle, a web-thinned tip for easier penetration and reduced thrust, and a regular spiral flute to evacuate chips efficiently. At 5.125 inches overall length with a 3.75-inch flute, it fits standard drill chucks and magnetic drill presses used in fabrication, mechanical, and maintenance work. Manufactured to ASME B94.11M and DIN 338 standards.\u003c\/p\u003e\u003cp\u003eThis bit is suited for residential and commercial trade applications where a reliable general-purpose drill bit is needed. Common install and fabrication scenarios include drilling pilot holes, clearance holes, and through-holes in ferrous and non-ferrous materials. The straight cylindrical shank accepts standard 3-jaw chucks on corded drills, drill presses, and right-angle drill attachments. It is a practical choice for HVAC installers, plumbers, electricians, and general contractors who need a dependable bit for sheet metal, structural steel, and wood framing tasks.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHigh speed steel construction for durability in general-purpose drilling applications\u003c\/li\u003e\n\u003cli\u003e118-degree standard point angle with web-thinned tip reduces entry thrust and walking\u003c\/li\u003e\n\u003cli\u003eRegular spiral flute with tapered web configuration promotes efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003eBright uncoated finish allows easy visual inspection of the cutting edge\u003c\/li\u003e\n\u003cli\u003eStraight cylindrical shank fits standard drill chucks without adapters\u003c\/li\u003e\n\u003cli\u003eManufactured to ASME B94.11M and DIN 338 standards for consistent dimensional tolerances\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose jobber-length drill bit compatible with any standard 3-jaw drill chuck that accommodates a 0.3906-inch straight cylindrical shank, including corded and cordless drills and bench drill presses.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis bit is installed by qualified tradespeople and general contractors using standard drill equipment. Secure the shank fully in the chuck and verify it is centered before drilling. Use appropriate cutting fluid when drilling hardened steel or stainless to extend bit life and reduce heat buildup. Wear eye protection and secure the workpiece before operation in accordance with applicable job-site safety requirements.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 25\/64 inches (0.3906 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 3.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.3906 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral (Regular)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\/Coating\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: -0.0010 to 0.0000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2002G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ASME B94.11M, DIN 338\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C72025\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51698447778098,"sku":"C72025","price":20.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ec5efc275247cb84080a7ab255e0492b.jpg?v=1788362999","url":"https:\/\/voomisupply.com\/products\/cleveland-c72025-jobber-drill-bit-25-64-in-hss","provider":"Voomi Supply","version":"1.0","type":"link"}