{"product_id":"cleveland-c71299-jobber-length-drill-bit-9-4-mm-hss","title":"Cleveland C71299 Jobber Length Drill Bit 9.4 Mm Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C71299 is a jobber length drill bit designed for general-purpose drilling in metal, wood, and plastic. Built from high speed steel with an oxide finish, it measures 9.4 mm (0.3700 inches) in diameter and 4.921 inches overall length. The standard 118-degree split point with web thinning reduces thrust and helps center the bit without a pilot hole. A right-hand spiral flute with regular helix evacuates chips efficiently during through-hole drilling. Licensed HVAC, plumbing, and electrical tradespeople reach for bits like this when drilling sheet metal enclosures, pipe flanges, electrical boxes, and structural members on the job.\u003c\/p\u003e\n\u003cp\u003eThis bit is suited for general-purpose production and field drilling where a standard jobber length reach is sufficient. The straight-cylindrical shank seats in standard three-jaw drill chucks on corded or cordless drills and drill presses. With a flute length of 3.189 inches and a flute-to-diameter ratio of 4xD, the C71299 handles moderate-depth holes without excessive deflection. It conforms to ASME B94.11M and DIN 338 standards, making it a predictable drop-in for shops and service vans that spec to those tolerances.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e9.4 mm (0.3700 inches) diameter with a tight tolerance of -0.0010 to 0.0000 inches for precise hole sizing\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction with oxide coating for heat and wear resistance\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web thinning reduces entry thrust and self-centers on flat surfaces\u003c\/li\u003e\n  \u003cli\u003eRight-hand, regular-helix spiral flute with 3.189 inches of flute length for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank fits standard three-jaw chucks without adapters\u003c\/li\u003e\n  \u003cli\u003eMeets ASME B94.11M and DIN 338 standards for consistent geometry and interchangeability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose jobber length drill bit compatible with any standard three-jaw drill chuck accepting a 0.3700-inch straight-cylindrical shank, including corded drills, cordless drills, and drill presses commonly used in HVAC, plumbing, and electrical trade work.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eSecure the straight-cylindrical shank firmly in a three-jaw chuck before drilling. Wear appropriate eye protection and secure the workpiece to prevent rotation. When drilling ferrous metals, use a cutting fluid or lubricant to extend bit life and reduce heat buildup. Inspect the cutting edges before each use and replace the bit if chipping or dulling is visible, as a damaged point increases the risk of bit breakage and imprecise holes.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 9.4 mm (0.3700 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.921 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 3.189 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.3700 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.7323 inches (44.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular Helix\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\/Coating\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute by Diameter Ratio\u003c\/strong\u003e: 4xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: -0.0010 to 0.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2001G\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ASME B94.11M, DIN 338\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241634\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C71299\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51717497749810,"sku":"C71299","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e8cc2c5f5d61efd607eeb7e10e2b6455_90ae7b6f-b846-4608-8c49-50467902bb48.jpg?v=1788541556","url":"https:\/\/voomisupply.com\/products\/cleveland-c71299-jobber-length-drill-bit-9-4-mm-hss","provider":"Voomi Supply","version":"1.0","type":"link"}