{"product_id":"cleveland-c71273-6-8mm-hss-jobber-length-drill-bit","title":"Cleveland C71273 6.8mm Hss Jobber Length Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C71273 is a jobber-length twist drill bit designed for general-purpose drilling in metal, wood, and plastic. Built from high speed steel with an oxide coating, it measures 6.8 mm (0.2677 inches) in diameter with an overall length of 4.291 inches. The standard 118-degree split point and web-thinned tip promote accurate starting and reduce walking on entry. With a straight-cylindrical shank and 2-flute spiral design, this bit fits standard drill chucks and delivers consistent chip evacuation through the cut. Licensed machinists, maintenance technicians, and mechanical contractors reach for this type of bit for everyday production and repair work.\u003c\/p\u003e\n\u003cp\u003eThis bit is suited for general-purpose hole-making operations in light to medium-duty shop and field environments. Its 2.717-inch flute length accommodates typical through-hole depths found in structural components, fixtures, and mechanical assemblies. The regular spiral and tapered web configuration make it a practical choice for ferrous and non-ferrous stock within the 6.00 to 7.00 mm diameter range. It conforms to ASME B94.11M and DIN 338 standards, making it interchangeable with tooling specified to those dimensions in maintenance, fabrication, and industrial service applications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e6.8 mm (0.2677 inches) diameter with tight tolerance of -0.0010 to 0.0000 inches for accurate hole sizing\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction with oxide finish for corrosion resistance and reduced friction\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web-thinned tip for positive engagement and reduced thrust\u003c\/li\u003e\n  \u003cli\u003eRegular spiral, 2-flute design promotes efficient chip removal during drilling\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank (0.2677 inches) fits standard 3-jaw drill chucks without adapters\u003c\/li\u003e\n  \u003cli\u003eMeets ASME B94.11M and DIN 338 standards for dimensional interchangeability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose jobber-length drill bit for use in any standard drill chuck accepting a 0.2677-inch straight shank, conforming to DIN 338 and ASME B94.11M specifications for the 6.00 to 7.00 mm diameter range.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstall in a properly sized drill chuck and tighten securely before operation. Always wear appropriate eye protection and secure the workpiece before drilling. Reduce feed rate when breaking through the far side of the material to prevent grab or bit breakage. Inspect the cutting edges before each use and replace the bit if chipping or excessive wear is observed.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 6.8 mm (0.2677 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.291 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2.717 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.2677 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.575 inches (40 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\/Coating\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: -0.0010 to 0.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute-to-Diameter Ratio\u003c\/strong\u003e: 4xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2001G\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ASME B94.11M, DIN 338\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241634\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C71273\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51699852869938,"sku":"C71273","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e8cc2c5f5d61efd607eeb7e10e2b6455_42740d1b-525b-4c80-922b-448c6a0263af.jpg?v=1788381995","url":"https:\/\/voomisupply.com\/products\/cleveland-c71273-6-8mm-hss-jobber-length-drill-bit","provider":"Voomi Supply","version":"1.0","type":"link"}