{"product_id":"cleveland-c71260-5-5-mm-hss-jobber-length-drill-bit","title":"Cleveland C71260 5.5 Mm Hss Jobber Length Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe CLEVELAND C71260 is a jobber-length drill bit designed for general-purpose metal drilling in trade and industrial applications. Built from high speed steel (HSS) with an oxide coating, this bit measures 5.5 mm (0.2165 inches) in diameter and 3.661 inches overall length. The 118-degree standard point angle is web-thinned for easier penetration and reduced thrust. With a straight-cylindrical shank and right-hand spiral flute, it seats securely in standard drill chucks and delivers consistent chip evacuation. HVAC techs, plumbers, electricians, and general contractors reach for this size when drilling pilot holes, sheet metal, and light structural steel.\u003c\/p\u003e\u003cp\u003eThe C71260 is suited for use in stationary drill presses, handheld power drills, and cordless drivers in both residential and commercial job-site environments. Its 5.5 mm diameter falls in the 5.00-6.00 mm size range and is a common metric sizing for fastener clearance holes and conduit or tubing access points. The two-flute regular spiral geometry handles a broad range of ferrous and non-ferrous materials under general-purpose cutting conditions.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHigh speed steel construction with oxide coating for wear resistance on general-purpose materials\u003c\/li\u003e\n\u003cli\u003e118-degree standard point angle with web thinning for reduced entry thrust\u003c\/li\u003e\n\u003cli\u003eRight-hand cut, two-flute regular spiral for efficient chip removal\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical shank compatible with standard drill chucks\u003c\/li\u003e\n\u003cli\u003eMeets ASME B94.11M and DIN 338 standards for consistent dimensional accuracy\u003c\/li\u003e\n\u003cli\u003eFlute-to-diameter ratio of 4xD provides clearance depth suitable for typical jobber-length applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style general-purpose jobber-length drill bit compatible with standard 3-jaw and keyless drill chucks that accept a 0.2165-inch straight-cylindrical shank.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation of this drill bit should be performed by qualified trade professionals following standard drill press or handheld tool safety practices. Secure the shank fully into the chuck and verify runout before drilling. Always wear appropriate eye protection, and clamp workpieces securely to prevent movement. Confirm the tool and workpiece are stationary before chuck key removal or bit changes.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 5.5 mm (0.2165 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.661 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2.244 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.2165 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.4173 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\/Coating\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard, Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: -0.0007 to 0.0000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute by Diameter Ratio\u003c\/strong\u003e: 4xD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ASME B94.11M, DIN 338\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2001G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241634\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C71260\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51700553449778,"sku":"C71260","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e8cc2c5f5d61efd607eeb7e10e2b6455_d06cfcd2-7f5f-41bd-bd6d-1a8cc9e032ca.jpg?v=1788391881","url":"https:\/\/voomisupply.com\/products\/cleveland-c71260-5-5-mm-hss-jobber-length-drill-bit","provider":"Voomi Supply","version":"1.0","type":"link"}