{"product_id":"cleveland-c71250-jobber-length-drill-bit-4-5-mm-hss","title":"Cleveland C71250 Jobber Length Drill Bit 4.5 Mm Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C71250 is a jobber-length twist drill bit designed for general-purpose metal drilling in professional trade and industrial applications. Built from high speed steel with an oxide coating, it measures 4.5 mm (0.1772 inches) in diameter with an overall length of 3.15 inches and a flute length of 1.85 inches. The 118-degree standard point angle and web-thinned tip reduce entry force and improve centering on most common materials. The straight-cylindrical shank seats securely in standard drill chucks. This bit meets ASME B94.11M and DIN 338 specifications, making it a reliable choice for machinists, maintenance technicians, and trade professionals who need consistent performance in everyday drilling tasks.\u003c\/p\u003e\n\u003cp\u003eThe C71250 fits typical general-purpose drilling scenarios including ferrous and non-ferrous metal, mild steel, aluminum, and similar materials encountered in HVAC, plumbing, electrical, and mechanical trade work. Its 4xD flute-to-diameter ratio provides adequate chip clearance in shallow-to-moderate-depth holes. The right-hand spiral flute and regular spiral type suit standard drill presses, cordless drill\/drivers, and hand drills used in field and shop settings. Sold individually, this bit is appropriate for single-task use or stocking in a trade kit.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e4.5 mm (0.1772 inches) diameter with a tolerance of -0.0007 to 0.0000 inches for consistent sizing\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web-thinned, tapered web for easier entry and reduced walking\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction with oxide finish for corrosion resistance and moderate heat protection\u003c\/li\u003e\n  \u003cli\u003e2-flute regular spiral design with 1.85-inch flute length for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank (0.1770 inches) compatible with standard 3-jaw drill chucks\u003c\/li\u003e\n  \u003cli\u003eMeets ASME B94.11M and DIN 338 standards for dimensional and performance consistency\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose replacement or stock bit for use in standard drill chucks accepting straight-cylindrical shanks in the 4.0 mm to 5.0 mm diameter range. Suitable for drill presses, hand drills, and cordless drivers used across HVAC, plumbing, electrical, and mechanical trades.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation of this drill bit requires seating the straight-cylindrical shank fully into the drill chuck and tightening securely before use. Always power down or disconnect the drill before changing bits. Eye protection and appropriate work-holding are required per standard shop safety practices. Do not exceed the recommended feed rate for the material being drilled, as excessive pressure can cause premature tip wear or bit breakage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 4.5 mm (0.1772 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.15 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.85 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1770 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.2992 inches (33 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\/Coating\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: -0.0007 to 0.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2001G\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ASME B94.11M, DIN 338\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C71250\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51692610027826,"sku":"C71250","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e8cc2c5f5d61efd607eeb7e10e2b6455_1fea5699-d877-4fdd-b5dd-e96dbeb2be8f.jpg?v=1788299931","url":"https:\/\/voomisupply.com\/products\/cleveland-c71250-jobber-length-drill-bit-4-5-mm-hss","provider":"Voomi Supply","version":"1.0","type":"link"}