{"product_id":"cleveland-c71234-jobber-length-drill-bit-2-9-mm-hss","title":"Cleveland C71234 Jobber Length Drill Bit 2.9 Mm Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C71234 is a jobber-length twist drill bit designed for general-purpose drilling in metal, wood, and plastics. Manufactured from high speed steel with an oxide coating for added corrosion resistance and heat reduction, it carries a 2.9 mm (0.1142 inch) diameter and an overall length of 2.402 inches. The standard 118-degree split point and web-thinned tip reduce walking on entry and lower the thrust required to start a hole. Two spiral flutes evacuate chips efficiently during right-hand cutting operations. Licensed trades and maintenance machinists reach for this bit when a reliable, consistent metric jobber drill is needed for production or service work.\u003c\/p\u003e\n\u003cp\u003eThe C71234 is suited for light-duty to medium-duty drilling in residential and commercial maintenance, mechanical contracting, fabrication shops, and field service applications. The straight-cylindrical shank seats securely in standard three-jaw chucks on both handheld and bench-mounted drill presses. The Series 2001G designation places it within a well-established general-purpose metric drill family. This bit is sold individually but is packaged in minimum order quantities consistent with trade procurement.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh speed steel construction with oxide coating for heat resistance and corrosion protection\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web-thinned tip for reduced entry thrust and less walking\u003c\/li\u003e\n  \u003cli\u003eTwo spiral flutes with regular helix for efficient chip evacuation in right-hand cutting\u003c\/li\u003e\n  \u003cli\u003eTapered web configuration adds rigidity along the flute length\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank fits standard chucks without adapters\u003c\/li\u003e\n  \u003cli\u003eMeets ASME B94.11M and DIN 338 standards for dimensional consistency\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose jobber-length metric drill bit compatible with any standard three-jaw chuck drill press, cordless drill, or right-angle drill that accepts a straight-cylindrical shank of 0.1142 inch diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eSecure the shank fully in the chuck and verify concentricity before drilling. Always wear appropriate eye protection and ensure the workpiece is firmly clamped or fixtured before starting. Use cutting fluid or coolant when drilling ferrous metals to extend bit life and maintain dimensional accuracy. Inspect the cutting edges for wear regularly; a dull bit generates excess heat and can cause oversize holes.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 2.9 mm (0.1142 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.402 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.299 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1142 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 28 mm (1.1024 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular Helix\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\/Coating\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: -0.0005 to 0.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute by Diameter Ratio\u003c\/strong\u003e: 4xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2001G\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ASME B94.11M, DIN 338\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Performance Grade\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C71234\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51720268742962,"sku":"C71234","price":47.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e8cc2c5f5d61efd607eeb7e10e2b6455_5205e1ab-816b-4908-a63b-3c050d9a7ed1.jpg?v=1788562053","url":"https:\/\/voomisupply.com\/products\/cleveland-c71234-jobber-length-drill-bit-2-9-mm-hss","provider":"Voomi Supply","version":"1.0","type":"link"}