{"product_id":"cleveland-c71220-2mm-hss-jobber-length-drill-bit","title":"Cleveland C71220 2mm Hss Jobber Length Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe CLEVELAND C71220 is a jobber-length twist drill bit designed for general-purpose drilling in metal, wood, and plastic. It measures 2 mm in diameter (0.0787 inches) with an overall length of 1.929 inches and a flute length of 0.945 inches. The bit is manufactured from high speed steel with an oxide coating that provides moderate heat and corrosion resistance during cutting operations. The 118-degree standard point angle suits a wide range of common drilling applications. The straight-cylindrical shank seats securely in standard drill chucks. This bit is sized for light-duty precision work and is commonly used by machinists, pipefitters, electricians, and general trade technicians who need reliable small-diameter drilling capacity.\u003c\/p\u003e\u003cp\u003eThe C71220 is suited for residential and light commercial trade work where small-diameter hole-making is required. Typical applications include pilot holes, sheet metal work, conduit and bracket installation, and general fabrication tasks. The 2 mm diameter and jobber-length format make it practical for use in standard handheld drills, drill presses, and benchtop machines. The right-hand spiral flute geometry clears chips effectively during through-hole drilling in softer metals and non-metallic materials. This bit is sold individually and is well-suited for technicians who carry a small-diameter metric drill set on the job.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e2 mm diameter (0.0787 inches) with tight diameter tolerance of -0.0005 to 0.0000 inches for consistent hole sizing\u003c\/li\u003e\n\u003cli\u003e118-degree standard point angle for general-purpose drilling across multiple materials\u003c\/li\u003e\n\u003cli\u003eHigh speed steel construction with oxide finish for heat resistance and extended service life\u003c\/li\u003e\n\u003cli\u003eRegular spiral, two-flute design promotes efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003eWeb-thinned tapered web reduces cutting resistance and improves point penetration\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical shank compatible with standard drill chucks\u003c\/li\u003e\n\u003cli\u003eMeets ASME B94.11M and DIN 338 standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose jobber-length drill bit in the Cleveland Series 2001G, sized to DIN 338 specification for use in standard drill chucks accepting straight-cylindrical shanks up to 0.0787 inches in diameter.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstall and remove drill bits only when the drill or drill press is fully powered down and the chuck is stationary. Secure the shank fully in the chuck before operation and verify the chuck key is removed before starting the machine. At this small diameter, use appropriate drill press speed settings for the target material to avoid bit breakage. Eye protection is required during all drilling operations per standard shop safety practice.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 2 mm (0.0787 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.929 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.945 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 0.984 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.0787 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\/Coating\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: -0.0005 to 0.0000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2001G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ASME B94.11M, DIN 338\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241634\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C71220\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51723125031218,"sku":"C71220","price":40.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e8cc2c5f5d61efd607eeb7e10e2b6455_c7ae741b-9200-4ede-b29f-c131e4e3326b.jpg?v=1788600929","url":"https:\/\/voomisupply.com\/products\/cleveland-c71220-2mm-hss-jobber-length-drill-bit","provider":"Voomi Supply","version":"1.0","type":"link"}