{"product_id":"cleveland-c71214-jobber-length-drill-bit-1-7-mm-hss","title":"Cleveland C71214 Jobber Length Drill Bit 1.7 Mm Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe CLEVELAND C71214 is a jobber-length twist drill bit designed for general-purpose drilling in metal, wood, and plastics. Built from high speed steel with an oxide coating, it measures 1.7 mm (0.0669 inches) in diameter and carries an overall length of 1.693 inches with a flute length of 0.787 inches. The 118-degree standard point angle and web-thinned tip reduce entry force and help center the bit without a pilot hole. Right-hand spiral flutes with a regular helix evacuate chips efficiently during through-hole and blind-hole operations. This bit conforms to DIN 338, the widely recognized standard for jobber-length drills, making it a reliable fit for production and maintenance work alike.\u003c\/p\u003e\u003cp\u003eThe C71214 is suited to light-duty bench drill, hand drill, and CNC drill-press applications where small-diameter precision holes are required. The straight-cylindrical shank seats in standard three-jaw chucks without adapters. It falls in the 0.05 to 0.10 inch diameter range class, a common size band for instrument work, sheet metal, and electrical enclosure fabrication. Machinists, maintenance technicians, electricians, and HVAC sheet-metal workers will find this bit appropriate for pilot holes, component mounting holes, and general fabrication tasks on light-gauge material.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHigh speed steel construction with oxide coating for lubricity and mild corrosion resistance\u003c\/li\u003e\n\u003cli\u003e118-degree standard point angle with web-thinned tip for reduced thrust and self-centering entry\u003c\/li\u003e\n\u003cli\u003eRegular spiral flute geometry promotes consistent chip evacuation in through and blind holes\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical shank fits standard three-jaw drill chucks without adapters\u003c\/li\u003e\n\u003cli\u003eConforms to DIN 338 specification for jobber-length drills\u003c\/li\u003e\n\u003cli\u003eDiameter tolerance held to -0.0005 to 0.0000 inches for accurate hole sizing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose jobber-length drill bit compatible with any standard three-jaw chuck accepting a 0.0669-inch straight-cylindrical shank, including benchtop drill presses, hand drills, and CNC drilling machines configured for small-diameter tooling.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eA licensed machinist or qualified technician should secure the shank fully in the chuck and verify runout before drilling. Always wear appropriate eye protection and secure the workpiece before beginning the cut. Do not exceed the recommended feed rate or spindle speed for the workpiece material, as overfeeding small-diameter bits can cause breakage. Inspect the cutting edges for wear or chipping before each use and replace the bit if the point shows visible degradation.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 1.7 mm (0.0669 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.693 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.787 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.0669 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral (Regular)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\/Coating\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: -0.0005 to 0.0000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification\u003c\/strong\u003e: DIN 338\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241634\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C71214\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51711736807730,"sku":"C71214","price":49.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c55f58e2e43cbc9674cbd9d2923ad624.jpg?v=1788479054","url":"https:\/\/voomisupply.com\/products\/cleveland-c71214-jobber-length-drill-bit-1-7-mm-hss","provider":"Voomi Supply","version":"1.0","type":"link"}