{"product_id":"cleveland-c71201-jobber-length-drill-bit-1-05-mm-hss","title":"Cleveland C71201 Jobber Length Drill Bit 1.05 Mm Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C71201 is a jobber-length twist drill bit designed for general-purpose drilling in metal, wood, and similar materials. Built from high speed steel with an oxide coating, this bit measures 1.05 mm (0.0413 inches) in diameter and carries an overall length of 1.339 inches. The 118-degree standard point angle and web-thinned tip geometry promote accurate starting and reduce thrust during drilling. A regular-spiral, two-flute configuration evacuates chips efficiently along the flute length of 0.472 inches. This bit is part of the Cleveland Series 2001G and conforms to ASME B94.11M and DIN 338 standards. It is sold individually and typically used by machinists, tool-and-die shops, and maintenance professionals.\u003c\/p\u003e\n\u003cp\u003eThe C71201 is suited for light-duty precision drilling applications where small-diameter hole quality matters. Its straight-cylindrical shank with a diameter of 0.0413 inches seats securely in standard drill chucks and collets. The right-hand cutting direction and regular spiral make this bit compatible with conventional drilling equipment. It is a practical choice for production environments, repair shops, and fabrication work requiring consistent small-bore results. The 4xD flute-to-diameter ratio and tapered web design support clean hole entry and exit in a variety of workpiece materials.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh speed steel construction with oxide coating for corrosion resistance and reduced friction\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web-thinned tip for accurate hole starting\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, regular spiral, two-flute design for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank at 0.0413 inches diameter fits standard drill chucks and collets\u003c\/li\u003e\n  \u003cli\u003eConforms to ASME B94.11M and DIN 338 dimensional standards\u003c\/li\u003e\n  \u003cli\u003eSeries 2001G general-purpose grade suitable for a wide range of workpiece materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose jobber-length drill bit compatible with standard drill chucks and collets accepting a 0.0413-inch straight-cylindrical shank.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis bit is installed and operated by machinists or maintenance technicians using a drill press, hand drill, or CNC drilling equipment. Secure the straight shank firmly in the chuck before operating to prevent slippage. Use appropriate cutting fluid or lubrication when drilling metals to extend tool life and improve hole quality. Inspect the cutting edges for wear or damage before each use; a dull or chipped bit can cause oversized holes or workpiece damage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 1.05 mm (0.0413 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.339 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.472 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.0413 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 22.00 mm (0.866 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish \/ Coating\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute by Diameter Ratio\u003c\/strong\u003e: 4xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: -0.0005 to 0.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ASME B94.11M, DIN 338\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2001G\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C71201\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51697803591986,"sku":"C71201","price":50.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e8cc2c5f5d61efd607eeb7e10e2b6455_7c7807c0-7e1b-42f6-8c17-04aaeef96750.jpg?v=1788354449","url":"https:\/\/voomisupply.com\/products\/cleveland-c71201-jobber-length-drill-bit-1-05-mm-hss","provider":"Voomi Supply","version":"1.0","type":"link"}