{"product_id":"cleveland-c71037-jobber-drill-bit-37-64-inch-hss","title":"Cleveland C71037 Jobber Drill Bit 37\/64 Inch Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C71037 is a jobber-length twist drill bit designed for general-purpose metal drilling in trade and industrial applications. Manufactured from high speed steel (HSS) with an oxide coating for added wear resistance, this bit features a 37\/64-inch (0.5781 inches decimal) diameter with a standard 118-degree point angle and a web-thinned, tapered web configuration for easier entry and reduced thrust. The straight-cylindrical shank measures 1.8125 inches in length, and the overall length is 6-5\/8 inches. Two spiral flutes with a regular helix clear chips efficiently during right-hand cutting operations.\u003c\/p\u003e\n\u003cp\u003eThis bit is suited for general-purpose drilling in steel, iron, aluminum, and similar materials across HVAC, plumbing, electrical, and mechanical trade work. The Series 2001G designation places it within a standard jobber-length line built to ASME B94.11M and DIN 338 specifications. Typical applications include drilling pilot holes, clearance holes, and through-holes in sheet metal, structural steel, and equipment frames during installation or service work. The flute length is 4-13\/16 inches, providing adequate depth for most standard drilling tasks without excessive bit deflection.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh speed steel construction with oxide coating for improved wear and heat resistance\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web-thinned tapered web for reduced entry thrust\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut with two regular spiral flutes for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank compatible with standard 3-jaw drill chucks\u003c\/li\u003e\n  \u003cli\u003eMeets ASME B94.11M and DIN 338 standards for jobber-length drill bits\u003c\/li\u003e\n  \u003cli\u003eDiameter tolerance of -0.0012 to 0.0000 inches ensures consistent hole sizing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose jobber-length drill bit for use in any standard drill chuck or drill press accepting a 0.5781-inch straight-cylindrical shank. Suitable for right-hand drilling operations across a range of common trade materials.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstall and remove this bit only with the drill or drill press powered off and unplugged. Secure the straight-cylindrical shank firmly in a properly sized 3-jaw chuck before operation. Use appropriate cutting fluid or coolant when drilling ferrous metals to extend bit life and maintain hole tolerance. Eye protection and work-holding devices are required when drilling in compliance with standard shop safety practices.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size\u003c\/strong\u003e: 37\/64 inches (0.5781 inches decimal)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6-5\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 4-13\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.8125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5781 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: -0.0012 to 0.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2001G\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ASME B94.11M, DIN 338\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C71037\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51719196934450,"sku":"C71037","price":67.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e8cc2c5f5d61efd607eeb7e10e2b6455_2db84a7c-181d-4126-9ccb-9edd1c91078c.jpg?v=1788558060","url":"https:\/\/voomisupply.com\/products\/cleveland-c71037-jobber-drill-bit-37-64-inch-hss","provider":"Voomi Supply","version":"1.0","type":"link"}