{"product_id":"cleveland-c71009-9-64-inch-hss-jobber-drill-bit","title":"Cleveland C71009 9\/64 Inch Hss Jobber Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C71009 is a jobber-length twist drill bit designed for general-purpose drilling in metal, wood, and plastic. It measures 9\/64 inch (0.1406 inch decimal) in diameter with a 2-7\/8 inch overall length and a 1-3\/4 inch spiral flute. The 118-degree standard point angle suits a wide range of common materials, and the oxide finish provides basic lubrication and corrosion resistance during use. The straight-cylindrical shank seats securely in standard 3-jaw drill chucks. This bit is part of the Cleveland Series 2001G line and conforms to ASME B94.11M and DIN 338 standards. It is a single-piece unit intended for use by machinists, pipefitters, electricians, and HVAC technicians requiring precision pilot holes or through-holes in light-gauge material.\u003c\/p\u003e\n\u003cp\u003eThis bit is suited for light industrial and trade applications where a reliable, general-purpose jobber drill is needed. Common uses include drilling pilot holes for fasteners, conduit knockouts, sheet metal penetrations, and similar tasks encountered in mechanical, electrical, and plumbing service work. The 4xD flute-to-diameter ratio provides adequate chip clearance for drilling in ferrous and non-ferrous metals as well as plastics. The web-thinned, tapered-web geometry reduces thrust at entry and helps maintain straightness in shallow to moderate-depth holes.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e9\/64 inch diameter (0.1406 inch decimal) with diameter tolerance of -0.0007 to 0.0000 inches for consistent hole sizing\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle for general-purpose use across metals, plastics, and wood\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction with oxide coating for basic lubrication and extended service life\u003c\/li\u003e\n  \u003cli\u003eWeb-thinned, tapered-web design reduces drilling thrust and improves point engagement\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, 2-flute spiral configuration with 1-3\/4 inch flute length for effective chip evacuation\u003c\/li\u003e\n  \u003cli\u003eConforms to ASME B94.11M and DIN 338 standards; Series 2001G\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose jobber-length drill bit compatible with any standard 3-jaw keyed or keyless drill chuck that accepts a straight-cylindrical shank of 0.1406 inch diameter, including benchtop drill presses, hand drills, and right-angle drill attachments commonly used in trade work.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis bit is installed and removed by a licensed or qualified tradesperson using a standard drill chuck and chuck key where applicable. Ensure the drill or drill press is fully de-energized and the chuck is secured before beginning drilling operations. Use appropriate cutting fluid when drilling ferrous metals to extend bit life and maintain hole tolerance. Follow applicable safety standards for rotating cutting tools per OSHA 29 CFR 1910.212 when used in shop or field environments.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 9\/64 inch (0.1406 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-7\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1-3\/4 inches (1.7500 inch decimal)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.1250 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1406 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\/Coating\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: -0.0007 to 0.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2001G\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ASME B94.11M, DIN 338\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241634\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C71009\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51718124437810,"sku":"C71009","price":42.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e8cc2c5f5d61efd607eeb7e10e2b6455_23e1c3ca-5460-40a7-9ef5-d49ab2c012d5.jpg?v=1788550014","url":"https:\/\/voomisupply.com\/products\/cleveland-c71009-9-64-inch-hss-jobber-drill-bit","provider":"Voomi Supply","version":"1.0","type":"link"}