{"product_id":"cleveland-c70365-cobalt-drill-bit-set-29-pc-1-16-1-2-in","title":"Cleveland C70365 Cobalt Drill Bit Set 29 Pc 1\/16-1\/2 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C70365 is a 29-piece cobalt jobber length drill bit set built for metalworking and heavy-duty drilling applications. Each bit in this Series 2213 set features a 135-degree split-point tip that reduces walking on contact and cuts faster than conventional 118-degree points. The cobalt construction provides heat resistance that keeps edges sharp when drilling hardened steel, stainless, and other tough alloys. Bits have a gold finish and straight shanks for use in standard drill chucks. Size range runs from 1\/16 inch to 1\/2 inch in 1\/64-inch step increments, covering the most common fractional sizes in one case. The set meets NAS 907 specification and is intended for right-hand cutting. Total weight is 3.3 pounds.\u003c\/p\u003e\n\u003cp\u003eThis set is suited for professional metalworking trades including machinists, pipefitters, ironworkers, and maintenance mechanics who need a full fractional drill index on the job. The 29-bit fractional range makes it a practical everyday drill index for fabrication shops, mechanical rooms, and field service work. All 29 bits are jobber length, providing the balance of reach and rigidity most needed in general-purpose metal drilling tasks. The included case keeps bits organized and protected between uses.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCobalt tool material delivers heat resistance for drilling hardened and stainless steel\u003c\/li\u003e\n  \u003cli\u003e135-degree split-point tip reduces walking and improves penetration without a center punch\u003c\/li\u003e\n  \u003cli\u003eFull 29-piece fractional set: 1\/16 inch to 1\/2 inch in 1\/64-inch increments\u003c\/li\u003e\n  \u003cli\u003eStraight shank fits standard drill chucks without adapters\u003c\/li\u003e\n  \u003cli\u003eGold finish coating on all bits for identification and surface protection\u003c\/li\u003e\n  \u003cli\u003eMeets NAS 907 specification for jobber length cobalt drills\u003c\/li\u003e\n  \u003cli\u003eStored in a metal or plastic index case for organized access\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose fractional drill index for use in standard 3-jaw drill chucks, drill presses, and hand drills that accept straight-shank bits up to 1\/2 inch. Suitable for metalworking and multipurpose drilling applications per the NAS 907 specification.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstall bits in a properly rated drill press or hand drill with a chuck capacity matching the shank diameter being used. Secure the shank fully in the chuck before operation and verify chuck key is removed. Use appropriate cutting fluid when drilling hardened steel or stainless to extend bit life. Right-hand cutting direction only — do not run in reverse under load.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Pieces\u003c\/strong\u003e: 29\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2213\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Cobalt\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split Point\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Gold\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Drill Bit Size\u003c\/strong\u003e: 1\/16 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drill Bit Size\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStep Increments\u003c\/strong\u003e: 1\/64 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Length Type\u003c\/strong\u003e: Jobber Length\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpecification Designation\u003c\/strong\u003e: NAS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpecification Number\u003c\/strong\u003e: NAS 907\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSystem of Measurement\u003c\/strong\u003e: Inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Application\u003c\/strong\u003e: Metalworking, Multipurpose Drill Bits\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: Heavy Duty\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStorage Unit Type\u003c\/strong\u003e: Case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStorage Unit Material\u003c\/strong\u003e: Metal or Plastic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 3.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C70365\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51695346843954,"sku":"C70365","price":564.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5efe9e82c79cc9e7815658ce4aa4c7fc.jpg?v=1788334097","url":"https:\/\/voomisupply.com\/products\/cleveland-c70365-cobalt-drill-bit-set-29-pc-1-16-1-2-in","provider":"Voomi Supply","version":"1.0","type":"link"}