{"product_id":"cleveland-c55300-spiral-point-tap-6-32-unc-hss-tin","title":"Cleveland C55300 Spiral Point Tap 6-32 Unc Hss Tin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C55300 is a spiral point tap designed for through-hole threading in metalworking and fabrication applications. It cuts a 6-32 UNC thread profile using a 2-flute, plug chamfer geometry that drives chips forward and out of the hole, reducing clogging in through-hole operations. The tap is manufactured from high speed steel (HSS) with a titanium nitride (TiN) coating that increases surface hardness and extends tool life compared to uncoated HSS. It carries an H3 thread limit and a Class 2B fit tolerance, which meets standard fastener thread requirements across most commercial and industrial assemblies. Overall length is 2.0 inches with a thread length of 0.38 inches.\u003c\/p\u003e\n\u003cp\u003eThe C55300 is suited for through-hole tapping in alloy steel, carbon steel, and aluminum workpieces. It is commonly used in machine shops, maintenance and repair operations, and light manufacturing environments where 6-32 UNC threaded holes are required in moderate-volume production. The right-hand thread direction and plug chamfer make it a practical choice for both manual tap handle use and machine tapping setups. The TiN finish provides added durability when running higher cycle counts on production runs.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e6-32 UNC thread profile with H3 thread limit for Class 2B fit tolerance\u003c\/li\u003e\n  \u003cli\u003e2-flute spiral point geometry pushes chips forward, optimized for through-hole applications\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction with TiN coating for increased wear resistance\u003c\/li\u003e\n  \u003cli\u003ePlug chamfer for progressive thread engagement and reduced entry force\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, no coolant-through requirement\u003c\/li\u003e\n  \u003cli\u003eOverall length of 2.0 inches, thread length of 0.38 inches, shank diameter of 0.141 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for through-hole tapping in alloy steel, aluminum, and carbon steel workpieces requiring a 6-32 UNC, Class 2B thread. Part of the CLEVELAND Series 1011TN.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis tap is intended for use by machinists and maintenance technicians in both manual and machine tapping applications. Ensure the workpiece is securely fixtured and the tap is aligned perpendicular to the hole before engagement. Use an appropriate cutting fluid for the material being tapped to extend tool life and improve thread quality. Do not force the tap if resistance increases unexpectedly, as breakage in small-diameter taps can occur without warning.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 6-32\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: UNC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChamfer\u003c\/strong\u003e: Plug\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClass of Fit\u003c\/strong\u003e: 2B\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Limit\u003c\/strong\u003e: H3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Through-Hole Threading\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Alloy Steel, Aluminum, Carbon Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.0 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Length\u003c\/strong\u003e: 0.38 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.141 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNeck Length\u003c\/strong\u003e: 0.32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 1011TN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C55300\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51698515640626,"sku":"C55300","price":26.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/461a1c1712093418929d9d6f9fb13da2.jpg?v=1788364080","url":"https:\/\/voomisupply.com\/products\/cleveland-c55300-spiral-point-tap-6-32-unc-hss-tin","provider":"Voomi Supply","version":"1.0","type":"link"}