{"product_id":"cleveland-c41632-square-end-mill-13-16-in-2-flute-hss","title":"Cleveland C41632 Square End Mill 13\/16 in 2 Flute Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C41632 is a 2-flute square end mill designed for general-purpose material removal and slotting in metalworking applications. Manufactured from high speed steel (HSS), it features a 13\/16 inch (0.8125 inch) cutting diameter, a 1-1\/2 inch length of cut, and a 4 inch overall length. The straight cylindrical shank with Weldon flat measures 5\/8 inch in diameter for secure tool holder engagement. A 30-degree helix angle and spiral flute geometry promote efficient chip evacuation. This is a centercutting tool, meaning it can be fed directly into a workpiece for plunge operations as well as conventional peripheral milling. Installed by machinists and tool-and-die professionals on manual mills and CNC machining centers.\u003c\/p\u003e\n\u003cp\u003eThe C41632 belongs to the Cleveland HG-2 series and is suited for milling cast iron, non-ferrous metals, and steel. The uncoated HSS construction makes it a practical choice for shops that resharpen tooling in-house or require a cost-effective general-purpose cutter. Right-hand cut and right-hand flute configuration is standard for use in conventional milling setups. The regular length classification keeps tool deflection manageable in typical depth-of-cut scenarios on knee mills, bed mills, and vertical machining centers.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCentercutting design allows direct plunge entry without a pre-drilled pilot hole\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle promotes smooth cutting action and chip flow on ferrous and non-ferrous materials\u003c\/li\u003e\n  \u003cli\u003eWeldon flat on the 5\/8 inch shank resists tool pullout under heavy side loads\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction supports in-house resharpening to extend tool life\u003c\/li\u003e\n  \u003cli\u003eUncoated finish — compatible with standard cutting fluids and coolant systems without coating concerns\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand spiral flute — drop-in compatible with standard R8, CAT, and BT collet holders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in milling operations on cast iron, non-ferrous metals, and steel workpieces. Fits any tool holder accepting a 5\/8 inch straight shank with Weldon flat, including standard R8 collets, end mill holders, and side-lock holders on manual and CNC mills.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eA licensed machinist or qualified toolroom technician should install and operate this end mill. Before mounting, ensure the spindle is fully stopped and locked out per shop lockout\/tagout procedures. Seat the shank fully into the holder and tighten the set screw against the Weldon flat to the tool holder manufacturer's specification. Verify runout with a dial indicator before beginning a cut, particularly in CNC applications where tool deflection affects part tolerance.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 13\/16 inch (0.8125 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1-1\/2 inches (1.5000 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 5\/8 inch (0.6250 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical with Weldon Flat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HG-2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Cast Iron, Non-Ferrous Metal, Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C41632\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51692919324978,"sku":"C41632","price":121.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/14106fa936c79a846381997cc3bc1082.jpg?v=1788304958","url":"https:\/\/voomisupply.com\/products\/cleveland-c41632-square-end-mill-13-16-in-2-flute-hss","provider":"Voomi Supply","version":"1.0","type":"link"}