{"product_id":"cleveland-c41628-square-end-mill-3-4-in-2-flute-hss","title":"Cleveland C41628 Square End Mill 3\/4 in 2 Flute Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe CLEVELAND C41628 is a 2-flute square end mill designed for material removal and profiling operations in machine shop and manufacturing environments. Built from high speed steel (HSS), it features a 3\/4 inch cutting diameter, a 1-5\/16 inch length of cut, and a 1\/2 inch straight-cylindrical shank with a Weldon flat for positive drive in collets and end mill holders. The 30-degree helix angle promotes efficient chip evacuation and reduces cutting forces. This is a right-hand cut, right-hand flute tool in the HG-2 series, intended for machinists and toolroom operators running manual or CNC milling equipment.\u003c\/p\u003e\u003cp\u003eThe C41628 is suited for slotting, peripheral milling, and step milling in cast iron, non-ferrous metals, and steel. Its centercutting geometry allows plunge entry directly into the workpiece, which expands its usefulness across profiling and pocketing operations without the need for a pre-drilled lead hole. The uncoated HSS construction makes it a practical choice for general-purpose work where re-sharpening is preferred over disposable tooling.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3\/4 inch cutting diameter with 1-5\/16 inch length of cut for medium-depth slotting and profiling\u003c\/li\u003e\n\u003cli\u003eHigh speed steel construction — resharpenable and suited for general-purpose milling\u003c\/li\u003e\n\u003cli\u003eCentercutting design allows direct plunge entry into workpiece material\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle promotes chip flow and reduces heat buildup at the cutting edge\u003c\/li\u003e\n\u003cli\u003eWeldon flat on 1\/2 inch shank provides positive drive and reduces pullout risk\u003c\/li\u003e\n\u003cli\u003eRight-hand cut, right-hand spiral flute geometry — standard orientation for conventional milling setups\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with standard 1\/2 inch end mill holders, collet chucks, or Weldon-style side-lock holders on manual knee mills and CNC machining centers. Primary workpiece materials are cast iron, non-ferrous metals, and steel as specified by the manufacturer.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by a machinist or toolroom professional. Power down and lock out the spindle before seating or removing any end mill. Ensure the Weldon flat is properly aligned with the holder's set screw to prevent tool pullout under load. Verify runout with a dial indicator before beginning production cuts, particularly in tight-tolerance applications.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/4 inch (0.7500 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1-5\/16 inch (1.3125 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3-5\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/2 inch (0.5000 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical with Weldon Flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HG-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Cast Iron, Non-Ferrous Metal, Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C41628\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51698501976370,"sku":"C41628","price":102.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/62d6a49392268dcdd96683b6be51d280.jpg?v=1788363869","url":"https:\/\/voomisupply.com\/products\/cleveland-c41628-square-end-mill-3-4-in-2-flute-hss","provider":"Voomi Supply","version":"1.0","type":"link"}