{"product_id":"cleveland-c41212-square-end-mill-3-8-in-4-flute-hss","title":"Cleveland C41212 Square End Mill 3\/8 in 4 Flute Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C41212 is a double-end, square-profile end mill designed for general-purpose milling operations in machine shops and production environments. Built from high speed steel (HSS), it features four spiral flutes with a 30-degree helix angle, right-hand cut, and right-hand flute direction. The straight-cylindrical shank with a Weldon flat provides secure tool holding in standard end mill holders and collet chucks. At 0.375 inches in diameter with a 0.75-inch length of cut, this tool is suited for slotting, profiling, and light pocket milling. Both ends are usable, making it a cost-effective choice for high-volume machining operations.\u003c\/p\u003e\n\u003cp\u003eThe C41212 falls within the Cleveland HD-4C series and is intended for use on manual mills and CNC machining centers. It is centercutting, allowing for direct plunge entry into a workpiece. Rated for use on cast iron, non-ferrous metals, and steel, it covers a broad range of common shop materials. The uncoated HSS construction makes it well suited to applications where regrinding is preferred over disposable carbide tooling.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eDouble-end design extends tool life by providing two usable cutting ends\u003c\/li\u003e\n  \u003cli\u003eFour spiral flutes at 30-degree helix angle for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows direct plunge cuts without pre-drilling\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank with Weldon flat for positive tool retention\u003c\/li\u003e\n  \u003cli\u003eUncoated HSS construction supports resharpening and regrinding\u003c\/li\u003e\n  \u003cli\u003eCompatible with cast iron, non-ferrous metals, and steel workpieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard 3\/8-inch end mill holders, collet chucks, and Weldon-style set-screw holders on manual vertical mills and CNC machining centers. Rated for primary workpiece materials including cast iron, non-ferrous metals, and steel (material codes K, N, and P).\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following the machine tool manufacturer's setup guidelines. Ensure the spindle is fully stopped and the machine is powered off before changing tooling. Secure the Weldon flat against the set screw to prevent axial pull-out under load. Verify runout with a dial indicator after tightening to maintain dimensional accuracy.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.375 inches (3\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.75 inches (3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.5 inches (3-1\/2 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.375 inches (3\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical with Weldon Flat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDouble End\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HD-4C\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Cast Iron, Non-Ferrous Metal, Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C41212\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51710990221618,"sku":"C41212","price":63.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d5bd1005294d0fbdeb9d32bca0ad5348.jpg?v=1788473246","url":"https:\/\/voomisupply.com\/products\/cleveland-c41212-square-end-mill-3-8-in-4-flute-hss","provider":"Voomi Supply","version":"1.0","type":"link"}