{"product_id":"cleveland-c41204-square-end-mill-3-16-inch-4-flute-hss","title":"Cleveland C41204 Square End Mill 3\/16 Inch 4 Flute Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe CLEVELAND C41204 is a double-end, four-flute square end mill ground from high speed steel (HSS) for general-purpose milling operations. It features a 3\/16-inch cutting diameter, a 1\/2-inch length of cut, and a 3\/8-inch straight-cylindrical shank with a Weldon flat for positive tool retention. The 30-degree spiral flute geometry promotes efficient chip evacuation, and the centercutting design allows plunge entry directly into the workpiece. Overall length is 3-1\/4 inches, placing this tool in the regular-length category. It ships uncoated and is ready for immediate use.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for milling cast iron, non-ferrous metals, and steel in both manual and CNC machining environments. The HD-4C series is built for shops that require a reliable HSS double-end tool at a compact diameter. Right-hand cut and right-hand flute orientation make it compatible with standard spindle configurations. Typical applications include slotting, profiling, and light pocketing passes where carbide tooling is not required.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDouble-end design extends usable tool life before replacement\u003c\/li\u003e\n\u003cli\u003eCentercutting flute geometry allows direct plunge cutting\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle promotes smooth chip flow and reduced chatter\u003c\/li\u003e\n\u003cli\u003eWeldon flat on shank provides positive set-screw engagement and prevents tool pull-out\u003c\/li\u003e\n\u003cli\u003eUncoated HSS construction is re-sharpenable and suited for a wide range of workpiece materials\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute for use in standard spindle setups\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in milling operations on cast iron, non-ferrous metals, and steel. Fits any standard collet, end mill holder, or Weldon-flat side-lock holder accepting a 3\/8-inch shank diameter.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and tool changes must be performed with the machine fully powered down and the spindle at a complete stop. Secure the Weldon flat against the set screw in the holder to the tool manufacturer's recommended clamping procedure before operation. Verify runout at setup with a dial indicator; excessive runout at small diameters will accelerate edge wear. Follow applicable shop safety standards and machine manufacturer guidelines for speeds and feeds based on workpiece material and depth of cut.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/16 inch (0.1875 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1\/2 inch (0.5000 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/8 inch (0.3750 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical with Weldon Flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble End\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Cast Iron, Non-Ferrous Metal, Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HD-4C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C41204\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51702096658738,"sku":"C41204","price":66.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b82b7d756539516726ab53ec4a6428cf.jpg?v=1788409107","url":"https:\/\/voomisupply.com\/products\/cleveland-c41204-square-end-mill-3-16-inch-4-flute-hss","provider":"Voomi Supply","version":"1.0","type":"link"}