{"product_id":"cleveland-c39715-square-end-mill-5-8-in-3-flute-hss-ticn","title":"Cleveland C39715 Square End Mill 5\/8 in 3 Flute Hss Ticn","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C39715 is a single-end square end mill designed for material removal and profiling operations on milling machines and CNC machining centers. It measures 0.625 inches in cutting diameter with a 1.625-inch length of cut, a 0.625-inch straight shank, and a 3.25-inch overall length. Manufactured from high speed steel with a TiCN (titanium carbonitride) coating, this three-flute tool is part of the HG-3 series. The TiCN finish increases surface hardness and wear resistance compared to uncoated HSS, extending tool life in abrasive and interrupted-cut applications. The centercutting geometry allows plunge entry directly into workpiece material.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for milling cast iron, non-ferrous metals, and steel in both conventional and climb-milling operations. The three-flute configuration balances chip clearance and rigidity, making it practical for slotting, profiling, and peripheral cuts in short to medium run production. The right-hand cut and right-hand spiral flute direction are standard for conventional vertical milling setups. A 30-degree helix angle promotes smooth cutting action and chip evacuation. The straight shank with Weldon flat accommodates standard end mill holders and collets.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.625-inch cutting diameter with 1.625-inch length of cut for short-to-medium depth passes\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction with TiCN coating for improved wear resistance\u003c\/li\u003e\n  \u003cli\u003eThree flutes with 30-degree helix angle for balanced chip evacuation and cut smoothness\u003c\/li\u003e\n  \u003cli\u003eCentercutting design permits direct plunge entry without a pre-drilled pilot hole\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute direction for standard milling machine spindle compatibility\u003c\/li\u003e\n  \u003cli\u003eStraight shank with Weldon flat for secure seating in end mill holders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eRated for use on cast iron, non-ferrous metals, and steel workpieces. Compatible with standard end mill holders and collets accepting a 0.625-inch straight shank with Weldon flat. Part of the Cleveland HG-3 series of high speed steel end mills.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or toolroom technician. Secure the shank fully into the holder before tightening set screws, ensuring the Weldon flat is aligned with the set screw for positive retention. Verify spindle speed and feed rate against manufacturer cutting data charts for the specific workpiece material before engaging the cut. Inspect the cutting edges for wear or chipping before each use and replace if edge integrity is compromised.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.625 inches (5\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.625 inches (1-5\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.25 inches (3-1\/4 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.625 inches (5\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiCN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical with Weldon Flat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HG-3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Cast Iron, Non-Ferrous Metal, Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C39715\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51715419341106,"sku":"C39715","price":129.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f60f9b33d98aa7964a10ad0e237490cc.jpg?v=1788513643","url":"https:\/\/voomisupply.com\/products\/cleveland-c39715-square-end-mill-5-8-in-3-flute-hss-ticn","provider":"Voomi Supply","version":"1.0","type":"link"}