{"product_id":"cleveland-c39642-square-end-mill-1-4-in-3-flute-hss","title":"Cleveland C39642 Square End Mill 1\/4 in 3 Flute Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C39642 is a 3-flute, square-end, single-end mill designed for general-purpose material removal in ferrous and non-ferrous machining applications. Manufactured from high speed steel (HSS), it features a 30-degree helix angle and spiral flute geometry that promotes efficient chip evacuation and stable cutting action. The uncoated HSS construction suits a wide range of shop environments where regrinding and reconditioning are standard practice. With a 1\/4 inch cutting diameter and 5\/8 inch length of cut, this tool handles slotting, profiling, and peripheral milling in both manual and CNC setups. It is installed and operated by machinists, toolroom technicians, and CNC operators.\u003c\/p\u003e\n\u003cp\u003eThe C39642 is sized for light to medium-duty milling work on cast iron, non-ferrous metals, and steel. The 3\/8 inch straight-cylindrical shank with Weldon flat accommodates standard side-lock and collet toolholders. The 2-7\/16 inch overall length keeps the tool in the regular-length category, minimizing deflection in standard reach applications. This end mill is well suited to job shops, production environments, and toolroom work where versatility across common workpiece materials is required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCenter-cutting geometry allows direct plunge entry into workpiece material\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle with spiral flute design promotes smooth chip flow and reduced chatter\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction supports regrinding and reconditioning for extended tool life\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, right-hand flute configuration for standard spindle operation\u003c\/li\u003e\n  \u003cli\u003eWeldon flat on shank provides positive drive and prevents tool pullout in side-lock holders\u003c\/li\u003e\n  \u003cli\u003eUncoated finish suitable for use with cutting fluid across a broad range of materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eRated for primary workpiece materials including cast iron, non-ferrous metals, and steel. Compatible with standard 3\/8 inch side-lock and collet toolholders. Part of the Cleveland HG-3 series of regular-length square end mills.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified machinist or CNC operator. Ensure the machine spindle is fully stopped and locked out before changing tooling. Seat the Weldon flat against the set screw in the toolholder to the manufacturer torque specification for the holder type used. Verify runout with a dial indicator before cutting, and confirm spindle speed and feed rate are appropriate for the workpiece material and depth of cut being taken.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.25 inches (1\/4 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.625 inches (5\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.375 inches (3\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-7\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical with Weldon Flat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HG-3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Cast Iron, Non-Ferrous Metal, Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C39642\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51711411028274,"sku":"C39642","price":61.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/05182b357f1321bac039658910528676.jpg?v=1788476333","url":"https:\/\/voomisupply.com\/products\/cleveland-c39642-square-end-mill-1-4-in-3-flute-hss","provider":"Voomi Supply","version":"1.0","type":"link"}