{"product_id":"cleveland-c39097-square-end-mill-1-in-2-flute-hss-tin","title":"Cleveland C39097 Square End Mill 1 in 2 Flute Hss Tin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe CLEVELAND C39097 is a 2-flute, single-end square end mill ground from high speed steel and finished with a titanium nitride (TiN) coating. It cuts a 1 inch diameter path with a 3 inch length of cut, and its straight cylindrical shank with Weldon flat measures 1 inch in diameter. The 5.5 inch overall length places this tool in the long-length category, making it well suited for deeper-reach milling operations where a standard-length end mill would fall short. A 30-degree helix angle promotes smooth chip evacuation across the supported workpiece materials. This tool is installed and run by machinists and tool-and-die professionals on manual or CNC milling equipment.\u003c\/p\u003e\u003cp\u003eThe C39097 is rated for use on cast iron, non-ferrous metals, and steel. Its centercutting geometry allows it to plunge directly into a workpiece without a pre-drilled pilot hole, supporting slot milling, pocket milling, and profiling operations in a single setup. The right-hand cut, right-hand spiral flute configuration is standard for conventional and climb milling on the majority of vertical and horizontal milling machines. The long length of cut range — 2 inches and above — makes this end mill a practical choice when deep slots or extended side-wall engagement is required.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1 inch milling diameter with a 3 inch length of cut for deep-reach applications\u003c\/li\u003e\n\u003cli\u003eHigh speed steel construction provides toughness for interrupted cuts and varied feed rates\u003c\/li\u003e\n\u003cli\u003eTiN coating increases surface hardness and reduces friction at the cutting edge\u003c\/li\u003e\n\u003cli\u003eCentercutting design allows direct plunge entry without a pilot hole\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle promotes efficient chip flow on steel, cast iron, and non-ferrous metals\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical shank with Weldon flat for secure toolholder engagement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use on cast iron, non-ferrous metals, and steel workpieces. Part of the Cleveland HG-2 long-length series. Fits any milling machine toolholder accepting a 1 inch straight-cylindrical shank with Weldon flat.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by a qualified machinist. Secure the Weldon flat against the toolholder set screw before tightening to the manufacturer torque specification for that holder. Confirm spindle direction matches the right-hand cut designation before starting the machine. Inspect the cutting edges and TiN coating for chips or wear before each use, and replace the tool if edge integrity is compromised.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1 inch (25.40 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiN (Titanium Nitride)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical with Weldon Flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HG-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Cast Iron, Non-Ferrous Metal, Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C39097\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51701708521778,"sku":"C39097","price":268.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f0cbed153625abd826d1719a33ce033d.jpg?v=1788404129","url":"https:\/\/voomisupply.com\/products\/cleveland-c39097-square-end-mill-1-in-2-flute-hss-tin","provider":"Voomi Supply","version":"1.0","type":"link"}