{"product_id":"cleveland-c33831-square-end-mill-9-16-in-2-flute-hss-ticn","title":"Cleveland C33831 Square End Mill 9\/16 in 2 Flute Hss Ticn","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C33831 is a 2-flute, single-end square end mill designed for precision material removal in milling operations. Built from high speed steel (HSS) with a titanium carbonitride (TiCN) finish, it delivers added surface hardness and wear resistance compared to uncoated HSS tooling. The cutter measures 9\/16 inches in diameter with a 1-1\/8 inch length of cut, a 1\/2 inch straight-cylindrical or Weldon flat shank, and a 3-3\/8 inch overall length. Its 30-degree helix angle and spiral flute geometry promote efficient chip evacuation. This tool is centercutting, allowing direct plunge entry into a workpiece without a pre-drilled hole.\u003c\/p\u003e\n\u003cp\u003eThe C33831 is suited for job shop and production machining environments where operators work with cast iron, non-ferrous metals, and steel. It fits standard milling machine spindles and CNC machining centers accepting a 1\/2 inch shank. The regular length profile makes it a practical choice for general-purpose peripheral and slot milling where extended reach is not required. Right-hand cut and right-hand flute orientation follow conventional tooling standards for typical vertical and horizontal milling setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eTiCN coating improves surface hardness and extends tool life versus uncoated HSS\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows plunge cutting without a pilot hole\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle supports smooth cutting action and efficient chip removal\u003c\/li\u003e\n  \u003cli\u003eCompatible with Weldon flat or straight-cylindrical tool holders for secure clamping\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute — standard orientation for conventional milling\u003c\/li\u003e\n  \u003cli\u003eSeries HG-2 regular length classification for general-purpose slot and peripheral milling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use on cast iron, non-ferrous metals, and steel workpieces. Accepts standard 1\/2 inch collets, end mill holders, or Weldon-style set-screw holders. Series HG-2 regular length designation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or CNC operator. Secure the shank fully within the tool holder to the recommended engagement depth before tightening set screws or collet nuts. Power down and lock out the spindle before changing tooling. Always verify spindle speed and feed rate for the specific workpiece material before initiating a cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 9\/16 inches (0.5625 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1-1\/8 inches (1.1250 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3-3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/2 inches (0.5000 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: TiCN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical \/ Weldon Flat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HG-2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Cast Iron, Non-Ferrous Metal, Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C33831\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51723897209138,"sku":"C33831","price":89.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f91a0f693fbf05cec2a8ece7c0a053bf.jpg?v=1788609531","url":"https:\/\/voomisupply.com\/products\/cleveland-c33831-square-end-mill-9-16-in-2-flute-hss-ticn","provider":"Voomi Supply","version":"1.0","type":"link"}