{"product_id":"cleveland-c33783-square-end-mill-3-4-in-2-flute-hss-tin","title":"Cleveland C33783 Square End Mill 3\/4 in 2 Flute Hss Tin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C33783 is a square end mill designed for material removal and profile milling in machining applications. Built from high speed steel (HSS) with a titanium nitride (TiN) finish, it offers improved surface hardness and wear resistance over uncoated HSS tooling. The mill features a 3\/4 inch cutting diameter, a 1-5\/16 inch length of cut, and a 1\/2 inch straight cylindrical shank with a Weldon flat for secure tool holding. With 2 flutes and a 30-degree helix angle, this end mill is suited for general-purpose roughing and finishing cuts. It is centercutting, allowing plunge entry into workpieces. Machinists and CNC operators handling production and job-shop work will find this tool appropriate for a wide range of milling tasks.\u003c\/p\u003e\n\u003cp\u003eThe C33783 belongs to the Cleveland HG-2 series, which is engineered for use on cast iron, non-ferrous metals, and steel. The overall length is 3-5\/8 inches, making it a regular-length tool compatible with standard toolholders and collet chucks on vertical machining centers and manual knee mills. It is well suited for slot milling, side milling, and peripheral cuts where a 2-flute geometry provides chip clearance. The right-hand cut and right-hand spiral flute configuration is standard for conventional CNC spindle operation.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh speed steel construction with TiN coating for extended tool life on steel, cast iron, and non-ferrous materials\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows direct plunge milling without a pre-drilled pilot hole\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle promotes smooth cutting action and effective chip evacuation\u003c\/li\u003e\n  \u003cli\u003e1\/2 inch shank with straight-cylindrical profile and Weldon flat for positive tool retention\u003c\/li\u003e\n  \u003cli\u003eRegular length (3-5\/8 inches OAL) fits standard toolholders without extended-reach adapters\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute direction compatible with standard CNC and manual mill spindles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use on cast iron, non-ferrous metals, and steel workpieces. Accepts standard 1\/2 inch collets, end mill holders, or Weldon-flat-style set-screw holders. Part of the Cleveland HG-2 series of general-purpose HSS end mills.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and tool changes must be performed with the spindle fully stopped and the machine in a locked-out state per shop lockout\/tagout procedures. Seat the Weldon flat against the set screw in the holder to prevent axial pullout under cutting loads. Verify runout at the tool tip before starting cuts, as excessive runout accelerates tool wear and reduces surface finish quality. Machinists should confirm feed rate, depth of cut, and spindle speed are appropriate for the workpiece material and machine rigidity before engaging the cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/4 inch (0.7500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1-5\/16 inches (1.3125 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/2 inch (0.5000 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3-5\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiN (Titanium Nitride)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical with Weldon Flat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Cast Iron, Non-Ferrous Metal, Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HG-2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C33783\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51721093022002,"sku":"C33783","price":110.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/570f7f6f00dfb40d3b550daf1a63b897.jpg?v=1788573420","url":"https:\/\/voomisupply.com\/products\/cleveland-c33783-square-end-mill-3-4-in-2-flute-hss-tin","provider":"Voomi Supply","version":"1.0","type":"link"}