{"product_id":"cleveland-c33766-square-end-mill-13-32-in-2-flute-hss-tin","title":"Cleveland C33766 Square End Mill 13\/32 in 2 Flute Hss Tin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C33766 is a single-end square end mill designed for precision material removal in ferrous and non-ferrous machining applications. Ground from high speed steel (HSS) and finished with a titanium nitride (TiN) coating, this tool delivers extended wear resistance compared to uncoated HSS. It measures 13\/32 inches in cutting diameter with a 13\/16-inch length of cut and a 3\/8-inch straight shank. The 2-flute, spiral-flute geometry supports chip evacuation and is centercutting, allowing direct plunge entry. Overall length is 2-11\/16 inches. This end mill belongs to Cleveland's HG-2 series and is installed by machinists and tool-and-die professionals on manual mills and CNC machining centers.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for milling operations in cast iron, non-ferrous metals, and steel. Its right-hand cut and right-hand flute configuration make it compatible with standard spindle rotation on conventional knee mills and vertical machining centers. The regular-length classification positions it for general-purpose slotting, profiling, and peripheral milling where extended reach is not required. Primary workpiece material codes P, K, and N indicate suitability across steel, cast iron, and non-ferrous alloy stock.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e13\/32-inch (0.4063 inch) cutting diameter with 13\/16-inch (0.8125 inch) length of cut\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction with TiN finish for improved surface hardness and tool life\u003c\/li\u003e\n  \u003cli\u003e2-flute spiral-flute design supports chip clearance during slotting and plunge cuts\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows direct plunge entry without pre-drilling\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle balances cutting efficiency and edge strength\u003c\/li\u003e\n  \u003cli\u003eStraight shank with Weldon flat for positive drive in end mill holders\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, right-hand flute  -  compatible with standard spindle rotation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard 3\/8-inch end mill holders and collets on vertical knee mills and CNC machining centers. Rated for primary workpiece materials including steel (P), cast iron (K), and non-ferrous metals (N) per ISO material group classification.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following the machine tool manufacturer's tooling guidelines. Secure the shank fully in a compatible end mill holder using the Weldon flat to prevent pullout under cutting load. Verify spindle speed and feed rate settings against material-specific cutting data before engaging the workpiece. Always de-energize and lock out the machine before changing or adjusting tooling.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 13\/32 inches (0.4063 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 13\/16 inches (0.8125 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-11\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/8 inches (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: TiN (Titanium Nitride)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical with Weldon Flat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HG-2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Cast Iron, Non-Ferrous Metal, Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C33766\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":67581832626482,"sku":"C33766","price":67.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/76041d8142c6ca2af18af04aa9c32104.jpg?v=1790407588","url":"https:\/\/voomisupply.com\/products\/cleveland-c33766-square-end-mill-13-32-in-2-flute-hss-tin","provider":"Voomi Supply","version":"1.0","type":"link"}