{"product_id":"cleveland-c33748-square-end-mill-17-32-in-2-flute-hss","title":"Cleveland C33748 Square End Mill 17\/32 in 2 Flute Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe CLEVELAND C33748 is a 2-flute, high speed steel square end mill designed for material removal and profiling operations on milling machines and machining centers. It measures 17\/32 inches (0.5313 inches) in diameter with a 1-1\/8-inch length of cut and a 3-3\/8-inch overall length. The 1\/2-inch straight-cylindrical shank accepts Weldon flat retention. A 30-degree helix angle promotes chip evacuation and helps reduce cutting forces across a range of workpiece materials. This is a centercutting tool, allowing plunge entry as well as lateral passes. Right-hand cut and right-hand flute geometry follow standard milling convention. Series HG-2 designation places it in the regular-length class of the CLEVELAND end mill lineup.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for milling cast iron, non-ferrous metals, and steel in general-purpose shop environments. Typical applications include slotting, side milling, profiling, and pocketing operations where a regular-length tool provides adequate reach without excessive overhang. The uncoated high speed steel construction makes it appropriate for lower-speed setups and jobs that involve regrinding worn tools rather than replacing coated carbide.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCentercutting geometry allows direct plunge entry without pre-drilling\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle aids chip flow and reduces heat buildup at the cutting edge\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical shank with Weldon flat for positive drive and minimal runout\u003c\/li\u003e\n\u003cli\u003eUncoated high speed steel construction supports regrinding to extend tool life\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand spiral flute — standard milling machine orientation\u003c\/li\u003e\n\u003cli\u003eRegular-length (HG-2 Series) proportions balance rigidity and reach for common setups\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in any milling machine or machining center with a 1\/2-inch tool-holding collet, end mill holder, or Weldon-flat side-lock holder. Primary workpiece materials include cast iron, non-ferrous metals, and steel.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist with the spindle fully powered down and locked out before tool changes. Seat the shank fully into the holder and, when using a Weldon-flat holder, align the flat to the set screw before torquing. Verify runout with a dial indicator after clamping. Follow your machine tool manufacturer guidelines and applicable shop safety codes when setting spindle speed and feed rate for the workpiece material.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 17\/32 inches (0.5313 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1-1\/8 inches (1.1250 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/2 inches (0.5000 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical with Weldon Flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HG-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Cast Iron, Non-Ferrous Metal, Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C33748\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51700954202418,"sku":"C33748","price":91.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/142da60c333add1a33695fbf973252fe.jpg?v=1788395858","url":"https:\/\/voomisupply.com\/products\/cleveland-c33748-square-end-mill-17-32-in-2-flute-hss","provider":"Voomi Supply","version":"1.0","type":"link"}