{"product_id":"cleveland-c33680-square-end-mill-0-75-in-2-flute-hss-tin","title":"Cleveland C33680 Square End Mill 0.75 in 2 Flute Hss Tin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C33680 is a double-end, two-flute square end mill manufactured from high speed steel with a titanium nitride (TiN) finish. Designed for material removal and profiling operations, it features a 0.75-inch mill diameter, a 1.3125-inch length of cut, and a 5.625-inch overall length. The spiral flute geometry and 30-degree helix angle promote efficient chip evacuation and smooth cutting action. Right-hand cut and right-hand flute orientation are standard. Centercutting capability allows the tool to plunge directly into the workpiece. This tool belongs to the HD-2 series, indicating a heavy-duty application profile suited for production and general-purpose milling work.\u003c\/p\u003e\n\u003cp\u003eThis end mill is rated for use on cast iron, non-ferrous metals, and steel. It fits standard milling machines, vertical machining centers, and manual knee mills that accept a 0.75-inch straight shank with Weldon flat. The double-end configuration extends tool life by providing two usable cutting ends, making it a practical choice for shops focused on reducing tooling cost per part. Machinists and tool-and-die professionals performing slotting, profiling, and peripheral milling operations will find this tool suited to regular-length cutting requirements.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eDouble-end design provides two cutting ends for extended tool life\u003c\/li\u003e\n  \u003cli\u003eTiN coating increases surface hardness and reduces friction at the cutting edge\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle with spiral flute for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows direct plunge entry without pre-drilling\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute orientation for standard spindle use\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank with Weldon flat for secure tool holding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard 0.75-inch shank replacement or new-installation end mill for milling machines and machining centers accepting straight-cylindrical or Weldon flat tool holders. Rated for cast iron, non-ferrous metal, and steel workpiece materials per HD-2 series specifications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following shop safety procedures. Secure the shank fully into the tool holder, engaging the Weldon flat set screw to prevent axial pullout under load. Verify spindle speed and feed rate against material and tool diameter recommendations before engaging the cut. Inspect both cutting ends for edge condition before each use and replace the tool when chipping or wear is visible.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.3125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5.625 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Titanium Nitride (TiN)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical with Weldon Flat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Double End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Cast Iron, Non-Ferrous Metal, Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HD-2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C33680\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51693050954034,"sku":"C33680","price":181.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a417157a986999aa77cf9339fa703993.jpg?v=1788306685","url":"https:\/\/voomisupply.com\/products\/cleveland-c33680-square-end-mill-0-75-in-2-flute-hss-tin","provider":"Voomi Supply","version":"1.0","type":"link"}