{"product_id":"cleveland-c33530-square-end-mill-3-4-in-2-flute-hss-tin","title":"Cleveland C33530 Square End Mill 3\/4 in 2 Flute Hss Tin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe CLEVELAND C33530 is a single-end square end mill designed for material removal in milling operations on non-ferrous metals. Built from high speed steel (HSS) with a titanium nitride (TiN) coating, it delivers improved wear resistance and extended tool life compared to uncoated HSS. The mill measures 0.75 inches in diameter with a 4-inch length of cut, a 0.75-inch straight-cylindrical shank with Weldon flat, and an overall length of 6.25 inches. The 37-degree helix angle and two-flute spiral geometry promote efficient chip evacuation. It is center-cutting and cuts in a right-hand direction. This tool belongs to the HGA-2 series and is classified as an extra-long length end mill.\u003c\/p\u003e\u003cp\u003eThe C33530 is suited for milling operations requiring extended reach, such as deep-pocket profiling and slotting in non-ferrous workpiece materials including aluminum, brass, copper, and similar alloys. The extra-long 4-inch length of cut makes it appropriate for applications where standard-length end mills cannot reach the full depth of the feature. It is used in manual milling machines, CNC machining centers, and horizontal mills across job shops, production facilities, and maintenance departments.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHigh speed steel construction with TiN coating for improved wear resistance\u003c\/li\u003e\n\u003cli\u003e4-inch length of cut in the extra-long category for deep-reach applications\u003c\/li\u003e\n\u003cli\u003e37-degree right-hand spiral helix promotes efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003eCenter-cutting design allows plunge entry into workpiece material\u003c\/li\u003e\n\u003cli\u003eTwo-flute geometry suited for non-ferrous metals requiring good chip clearance\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical shank with Weldon flat for positive tool retention in the holder\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in standard 3\/4-inch end mill holders and collet chucks. Primary workpiece material is non-ferrous metal. Belongs to the HGA-2 series of extra-long high speed steel end mills.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by qualified machinists or tool and die technicians. Ensure the spindle is powered down and the machine is in a safe, locked-out state before loading or removing the tool. Seat the shank fully in the holder and torque the set screw against the Weldon flat to the holder specification to prevent pull-out under cutting loads. Verify runout with a dial indicator before beginning a cut, particularly given the extended length, as deflection is a greater concern than with standard-length end mills.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.75 inches (3\/4 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.75 inches (3\/4 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 37 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Titanium Nitride (TiN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical with Weldon Flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter-Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Non-Ferrous Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Extra Long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HGA-2\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C33530\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51716549771570,"sku":"C33530","price":180.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/119c8df94fcc7a19424979afd222811e.jpg?v=1788527677","url":"https:\/\/voomisupply.com\/products\/cleveland-c33530-square-end-mill-3-4-in-2-flute-hss-tin","provider":"Voomi Supply","version":"1.0","type":"link"}