{"product_id":"cleveland-c33275-square-end-mill-3-4-inch-4-flute-hss","title":"Cleveland C33275 Square End Mill 3\/4 Inch 4 Flute Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe CLEVELAND C33275 is a 4-flute, square-end, single-end mill manufactured from high speed steel (HSS) with a titanium carbonitride (TiCN) finish. It carries a 3\/4 inch cutting diameter, a 1-5\/8 inch length of cut, and a 1\/2 inch straight-cylindrical shank with a Weldon flat. Overall length is 3-3\/8 inches. The spiral flute geometry runs at a 30-degree helix angle with right-hand cut and right-hand flute orientation. The centercutting design allows plunge entry as well as peripheral and slot milling. This tool is part of the Cleveland HG-4C series and is installed by machinists and tool-and-die professionals on manual mills and CNC machining centers.\u003c\/p\u003e\u003cp\u003eThe C33275 is suited for milling cast iron, non-ferrous metals, and steel. The regular-length body fits standard tool holders and collets accepting a 1\/2 inch shank. Its 4-flute configuration provides a good balance of chip evacuation and surface finish, making it appropriate for finishing passes and medium-depth slotting operations in ferrous and non-ferrous workpieces. The TiCN coating adds surface hardness and reduces tool wear in abrasive materials.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3\/4 inch cutting diameter with 1-5\/8 inch length of cut in the 1.5 to 2.0 inch range class\u003c\/li\u003e\n\u003cli\u003eHigh speed steel construction with TiCN surface coating for extended tool life\u003c\/li\u003e\n\u003cli\u003e4-flute spiral design at 30-degree helix angle for efficient chip flow\u003c\/li\u003e\n\u003cli\u003eCentercutting geometry allows direct plunge milling without a pre-drilled entry hole\u003c\/li\u003e\n\u003cli\u003eRight-hand cut, right-hand flute — compatible with standard spindle rotation\u003c\/li\u003e\n\u003cli\u003e1\/2 inch straight-cylindrical shank with Weldon flat for positive tool retention\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in standard 1\/2 inch end mill holders, collet chucks, and Weldon-style set-screw tool holders on manual knee mills and CNC machining centers. Rated for primary workpiece materials including cast iron, non-ferrous metals, and steel.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist following the machine tool manufacturer's tooling guidelines. Ensure the spindle is fully stopped and the machine is in a locked-out, de-energized state before changing tooling. Seat the Weldon flat against the set screw in the holder to prevent axial pullout under cutting loads. Verify runout with a dial indicator after installation before beginning a cut.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/4 inch (0.7500 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: TiCN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1-5\/8 inch (1.6250 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/2 inch (0.5000 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical with Weldon Flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HG-4C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Cast Iron, Non-Ferrous Metal, Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C33275\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51706828030258,"sku":"C33275","price":136.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7489dc731e5581853e8da8bacf0aae89.jpg?v=1788436882","url":"https:\/\/voomisupply.com\/products\/cleveland-c33275-square-end-mill-3-4-inch-4-flute-hss","provider":"Voomi Supply","version":"1.0","type":"link"}