{"product_id":"cleveland-c33179-square-end-mill-1-in-4-flute-hss","title":"Cleveland C33179 Square End Mill 1 in 4 Flute Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C33179 is a 4-flute, square-end, single-end mill ground from high speed steel (HSS) for use in milling operations on cast iron, non-ferrous metals, and steel. It carries a 1 inch cutting diameter with a 1-7\/8 inch length of cut, and mounts on a 3\/4 inch straight-cylindrical or Weldon flat shank. Overall length is 4-1\/8 inches. The spiral flute geometry runs at a 30-degree helix angle, promoting chip evacuation and consistent surface finish across a range of workpiece materials. This is an uncoated, right-hand cut, right-hand flute tool in the HG-4C series.\u003c\/p\u003e\n\u003cp\u003eThe C33179 is suited to general-purpose peripheral and slot milling in job shop, production, and maintenance machining environments. The centercutting design allows direct plunge entry into the workpiece without a pre-drilled hole. Regular length classification makes it a practical choice for face milling, profiling, and pocketing operations on ferrous and non-ferrous materials where a standard reach is sufficient. It is intended for use in CNC machining centers and manual knee mills with a 3\/4 inch collet or end mill holder.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e4-flute spiral geometry with 30-degree helix angle for balanced chip load and smooth cutting action\u003c\/li\u003e\n  \u003cli\u003eCentercutting design permits plunge milling without a pilot hole\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute configuration — compatible with standard spindle rotation\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction — regrindable and suitable for interrupted cuts\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank with Weldon flat option for positive holder engagement\u003c\/li\u003e\n  \u003cli\u003eUncoated finish — ready for use with cutting fluid or dry in appropriate materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with cast iron, non-ferrous metals, and steel workpieces as specified by the manufacturer. Part of the Cleveland HG-4C series of regular-length square end mills.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and tooling changes must be performed with the machine spindle at a complete stop and the machine control in a locked-out state per applicable shop safety procedures. Secure the shank fully in a 3\/4 inch end mill holder or collet, ensuring the Weldon flat aligns with the set screw when using a Weldon-style holder. Confirm runout with a dial indicator before beginning cuts. Cutting fluid selection should match the workpiece material per the machine shop's standard practice.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1-7\/8 inches (1.875 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4-1\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/4 inch (0.750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical with Weldon Flat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Cast Iron, Non-Ferrous Metal, Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HG-4C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C33179\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51722103030066,"sku":"C33179","price":173.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ad132feca70ae1effcf48d6ee730e115.jpg?v=1788585757","url":"https:\/\/voomisupply.com\/products\/cleveland-c33179-square-end-mill-1-in-4-flute-hss","provider":"Voomi Supply","version":"1.0","type":"link"}