{"product_id":"cleveland-c33116-square-end-mill-3-8-in-4-flute-hss-ticn","title":"Cleveland C33116 Square End Mill 3\/8 in 4 Flute Hss Ticn","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe CLEVELAND C33116 is a double-end square end mill designed for metal-cutting operations in machining centers and manual mills. Built from high speed steel with a titanium carbonitride (TiCN) finish, it delivers extended tool life in abrasive cutting conditions. The mill measures 0.375 inches in diameter with a 0.750-inch length of cut, a 0.375-inch straight-cylindrical shank compatible with Weldon flat holders, and a 3.5-inch overall length. Four spiral flutes with a 30-degree helix angle provide efficient chip evacuation and smooth cutting action. The double-end design extends usable tool life between regrinds. This tool is installed by machinists and CNC operators in production and job-shop environments.\u003c\/p\u003e\u003cp\u003eThe C33116 is suited for milling cast iron, non-ferrous metals, and steel in a regular-length configuration. Its centercutting geometry allows for plunge operations as well as conventional profiling and slotting. The right-hand cut and right-hand flute orientation match standard spindle rotation on vertical and horizontal machining centers. The HD-4C series targets high-demand production applications where consistent dimensional accuracy and finish quality are required.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTiCN coating improves wear resistance and reduces heat buildup during cutting\u003c\/li\u003e\n\u003cli\u003eFour spiral flutes with 30-degree helix angle for efficient chip removal\u003c\/li\u003e\n\u003cli\u003eCentercutting design allows direct plunge entry into workpiece material\u003c\/li\u003e\n\u003cli\u003eDouble-end construction extends tool service intervals\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical shank with Weldon flat for positive drive retention\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute for standard spindle compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in toolholders accepting a 0.375-inch straight shank with Weldon flat. Rated for milling cast iron, non-ferrous metals, and steel. Part of the Cleveland HD-4C series for production milling applications.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist with the machine powered down and locked out before tool changes. Seat the shank fully in the holder and tighten set screws against the Weldon flat to the holder manufacturer's specification. Verify runout with a dial indicator before engaging the workpiece. Inspect both ends for edge condition before each use.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.375 inches (3\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.750 inches (3\/4 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.375 inches (3\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: TiCN (Titanium Carbonitride)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical with Weldon Flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Double End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HD-4C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Cast Iron, Non-Ferrous Metal, Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C33116\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51723935777074,"sku":"C33116","price":76.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4acc6f01a901d4376abb5af600f04418.jpg?v=1788610246","url":"https:\/\/voomisupply.com\/products\/cleveland-c33116-square-end-mill-3-8-in-4-flute-hss-ticn","provider":"Voomi Supply","version":"1.0","type":"link"}