{"product_id":"cleveland-c33104-square-end-mill-3-16-in-4-flute-hss-ticn","title":"Cleveland C33104 Square End Mill 3\/16 in 4 Flute Hss Ticn","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C33104 is a double-end, four-flute square end mill designed for precision milling of ferrous and non-ferrous metals. Built from high speed steel with a TiCN (titanium carbonitride) coating, it delivers improved hardness and heat resistance compared to uncoated HSS tooling. The cutting diameter is 0.1875 inches (3\/16 inch) with a 0.5-inch length of cut and a 3\/8-inch straight-cylindrical shank that also accepts a Weldon flat holder. Overall length is 3.25 inches. The double-end configuration doubles usable tool life before the end mill is retired. This tool is installed and used by machinists and tool-and-die professionals in CNC and manual milling applications.\u003c\/p\u003e\n\u003cp\u003eThe C33104 is suited for milling operations in cast iron, non-ferrous metals such as aluminum and brass, and steel workpieces. The 30-degree helix angle and spiral flute geometry promote efficient chip evacuation in these materials. Regular-length geometry makes it appropriate for standard-depth slot milling, profiling, and face milling where extended reach is not required. The centercutting design allows direct plunge entry into the workpiece without pre-drilling.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eDouble-end design provides two usable cutting ends, extending tool life\u003c\/li\u003e\n  \u003cli\u003eTiCN coating increases surface hardness and wear resistance for longer run time on ferrous materials\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle with spiral flutes for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eCentercutting capable — supports direct plunge cuts without pre-drilling\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, right-hand flute configuration for standard CNC and manual mill setups\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank with Weldon flat accommodates a range of tool holders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard 3\/8-inch collet chucks and Weldon flat end mill holders on CNC machining centers and manual knee mills. Rated for primary workpiece materials including cast iron, non-ferrous metals, and steel as specified by the manufacturer for the HD-4C series.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following the machine tool manufacturer's toolholder torque and runout specifications. Ensure the milling machine spindle is fully stopped and locked out before changing tooling. Verify shank seating depth and holder set-screw engagement before engaging the cut. Do not exceed the manufacturer's recommended feed and speed parameters for the workpiece material to avoid premature coating wear or tool breakage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.1875 inches (3\/16 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.5 inches (1\/2 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.25 inches (3-1\/4 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.375 inches (3\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiCN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical with Weldon Flat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDouble End\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Cast Iron, Non-Ferrous Metal, Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HD-4C\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C33104\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51706891141426,"sku":"C33104","price":77.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9399f23e749acd5f2fa6b9960ec89ea8.jpg?v=1788437235","url":"https:\/\/voomisupply.com\/products\/cleveland-c33104-square-end-mill-3-16-in-4-flute-hss-ticn","provider":"Voomi Supply","version":"1.0","type":"link"}