{"product_id":"cleveland-c33084-square-end-mill-17-32-in-4-flute-hss-tin","title":"Cleveland C33084 Square End Mill 17\/32 in 4 Flute Hss Tin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe CLEVELAND C33084 is a double-end, four-flute square end mill designed for precision milling in ferrous and non-ferrous materials. Ground from high speed steel (HSS) and coated with titanium nitride (TiN), it offers improved surface hardness and heat resistance compared to uncoated HSS tooling. The 17\/32 inch (0.5313 inch) cutting diameter pairs with a 5\/8 inch straight-cylindrical shank that also features a Weldon flat for positive retention in standard end mill holders. A 30-degree spiral flute geometry promotes efficient chip evacuation. This tool is centercutting, allowing direct plunge entry without a pilot hole. Licensed machinists, tool and die makers, and CNC operators are the primary users.\u003c\/p\u003e\u003cp\u003eThe C33084 belongs to Cleveland's HD-4C series, a regular-length line built for general-purpose slot milling, profiling, and peripheral cutting. The 1-3\/8 inch length of cut supports moderate-depth passes in cast iron, non-ferrous metals, and steel. Right-hand cut with right-hand flute orientation makes it compatible with standard spindle rotation on vertical machining centers and manual knee mills. The double-end design provides two usable cutting ends, extending service life before replacement.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDouble-end configuration gives two cutting ends per tool\u003c\/li\u003e\n\u003cli\u003eTiN coating increases surface hardness and reduces friction at the cutting edge\u003c\/li\u003e\n\u003cli\u003eCentercutting geometry allows direct plunge milling without pre-drilling\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle promotes chip flow and reduces cutting forces\u003c\/li\u003e\n\u003cli\u003eWeldon flat on shank prevents axial pull-out in side-lock holders\u003c\/li\u003e\n\u003cli\u003eHD-4C series regular-length design balances rigidity and reach\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in standard 5\/8 inch end mill holders, collet chucks, and Weldon-style side-lock holders on vertical machining centers and manual mills. Rated for cutting cast iron, non-ferrous metals, and steel.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by qualified machinists following shop safety protocols. Ensure the spindle is fully stopped and locked out before loading or removing the tool. Seat the shank fully into the holder and torque the set screw against the Weldon flat to the holder manufacturer's specification. Confirm runout with a dial indicator before beginning a cut, and select speeds and feeds appropriate for the workpiece material and depth of cut.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 17\/32 inch (0.5313 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1-3\/8 inch (1.3750 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 5\/8 inch (0.6250 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical with Weldon Flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel (HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Titanium Nitride (TiN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble End\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Cast Iron, Non-Ferrous Metal, Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HD-4C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C33084\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51707077329202,"sku":"C33084","price":179.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/dd77e787cc0c070e8b2fc182761f9a06.jpg?v=1788438239","url":"https:\/\/voomisupply.com\/products\/cleveland-c33084-square-end-mill-17-32-in-4-flute-hss-tin","provider":"Voomi Supply","version":"1.0","type":"link"}