{"product_id":"cleveland-c33083-square-end-mill-0-5in-4-flute-hss-tin","title":"Cleveland C33083 Square End Mill 0.5in 4 Flute Hss Tin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe CLEVELAND C33083 is a double-end, four-flute square end mill designed for material removal in milling operations across a range of workpiece materials. Built from high speed steel (HSS) with a titanium nitride (TiN) finish, this tool delivers improved surface hardness and wear resistance compared to uncoated HSS. The 0.5 inch diameter cutter features a 30-degree helix angle and spiral flute geometry with a 1 inch length of cut. Centercutting capability allows plunge entry into the workpiece. At 4.5 inches overall length with a 0.5 inch straight-cylindrical shank, it fits standard milling machine and machining center collets. Licensed machinists and toolroom operators are the primary users.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for milling operations in ferrous and non-ferrous materials including steel, cast iron, and non-ferrous metals. The double-end design extends tool life by providing two usable cutting ends per tool. Right-hand cut with right-hand flute geometry is standard for conventional vertical milling setups. The HD-4C series is a regular-length line intended for general-purpose slot milling, profiling, and peripheral cuts in job shop and production environments.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDouble-end design provides two cutting ends per tool, extending service life\u003c\/li\u003e\n\u003cli\u003eTiN coating increases surface hardness and reduces friction at the cutting edge\u003c\/li\u003e\n\u003cli\u003eCentercutting flute geometry enables direct plunge milling without pre-drilling\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle promotes efficient chip evacuation in spiral flute configuration\u003c\/li\u003e\n\u003cli\u003eCompatible with Weldon flat or straight-cylindrical shank holders\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute for standard milling machine setups\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in standard 0.5 inch milling collets, end mill holders, and Weldon flat-style tool holders. Suitable for steel, cast iron, and non-ferrous metal workpieces as noted in the HD-4C series specification.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist following shop-standard toolholding procedures. Ensure the spindle is fully stopped and the machine is powered down before changing tooling. Verify runout with a dial indicator after seating the shank in the holder. Follow machine manufacturer torque specifications for set screws when using Weldon flat holders.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Titanium Nitride (TiN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical with Weldon Flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Double End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HD-4C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Cast Iron, Non-Ferrous Metal, Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C33083\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51702061728050,"sku":"C33083","price":94.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/948e333a267107dc452aedf8d31f32c9.jpg?v=1788408722","url":"https:\/\/voomisupply.com\/products\/cleveland-c33083-square-end-mill-0-5in-4-flute-hss-tin","provider":"Voomi Supply","version":"1.0","type":"link"}