{"product_id":"cleveland-c32610-square-end-mill-0-125-in-4-flute-cobalt","title":"Cleveland C32610 Square End Mill 0.125 in 4 Flute Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C32610 is a 4-flute cobalt square end mill designed for demanding metal-removal applications in ferrous and high-temperature alloy materials. Built from M42 cobalt high-speed steel and finished with a TiCN coating, this tool delivers extended tool life and heat resistance in interrupted cuts and continuous feeds alike. The 0.125 inch cutting diameter pairs with a 0.375 inch length of cut, a 0.375 inch straight-cylindrical or Weldon flat shank, and a 2.3125 inch overall length. The 30-degree spiral flute geometry promotes efficient chip evacuation, and the centercutting design allows plunge entry without a pre-drilled pilot hole.\u003c\/p\u003e\n\u003cp\u003eThis end mill is intended for machining high-temperature alloys, stainless steel, and general steel workpieces. It fits production and job-shop environments where small-diameter finish milling, slotting, and profiling are performed on CNC machining centers or manual knee mills. The HGC-4C series is suited to applications where carbide is cost-prohibitive or where tool toughness against shock loading is a priority over maximum hardness. Its regular-length geometry makes it appropriate for standard-depth pockets and contour passes without the deflection risk of extended-reach tooling.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM42 cobalt construction resists heat and wear in high-temperature alloy and stainless steel cuts\u003c\/li\u003e\n  \u003cli\u003eTiCN finish increases surface hardness and reduces built-up edge on gummy materials\u003c\/li\u003e\n  \u003cli\u003e30-degree helix spiral flute promotes positive chip flow and reduces cutting forces\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry enables direct plunge milling without pre-drilling\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute configuration for standard CNC and manual spindle rotation\u003c\/li\u003e\n  \u003cli\u003eWeldon flat option on shank provides positive drive and reduces pullout risk under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in 0.375 inch end mill holders, collet chucks, or Weldon-flat set-screw holders accepting a 0.375 inch shank. Primary workpiece materials are high-temperature alloys, stainless steel, and steel as designated by material codes M, P, and S.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or toolroom technician following standard CNC or manual mill setup procedures. Ensure the spindle is at a complete stop and the machine is in a safe, locked-out state before changing tooling. Seat the shank fully into the holder and torque set screws to the holder manufacturer specification when using a Weldon flat holder. Confirm runout with a dial indicator before cutting, particularly at this small diameter where even minor runout accelerates tool wear and degrades surface finish.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiCN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.375 inches (3\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.375 inches (3\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.3125 inches (2-5\/16 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical with Weldon Flat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HGC-4C\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: High Temperature Alloy, Stainless Steel, Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C32610\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51691025695026,"sku":"C32610","price":55.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c83524fc0a8224ee573c8392d9261ae0.jpg?v=1788279481","url":"https:\/\/voomisupply.com\/products\/cleveland-c32610-square-end-mill-0-125-in-4-flute-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}