{"product_id":"cleveland-c24286-taper-pin-reamer-size-10-hss","title":"Cleveland C24286 Taper Pin Reamer Size 10 Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe CLEVELAND C24286 is a size 10 taper pin reamer ground from high-speed steel for hole enlarging, hole finishing, and hole shaping operations. It produces a precisely tapered bore to accept standard number 10 taper pins, with a small end diameter of 0.5799 inches and a large end diameter of 0.7216 inches at a 1:48 taper rate. The six-flute spiral geometry with a right-hand cut delivers clean, accurate material removal. A bright, uncoated finish keeps the tool at full ground diameter and suits a wide range of workpiece materials. Machinists and toolroom technicians install this reamer in manual or CNC machine tools where a precise taper pin seat is required.\u003c\/p\u003e\u003cp\u003eThis reamer is suited for general-purpose production and toolroom work on cast iron, steel, and steel alloy workpieces. It is commonly used when assembling or repairing mechanical joints that rely on taper pins for positive alignment and load transfer, such as machine spindles, shafts, and fixture components. The 5\/8-inch square shank provides solid drive engagement in standard reamer holders and tap-and-die sets on manual mills, lathes, and drill presses.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSize 10 taper pin geometry with a 1:48 taper rate for standard taper pin seating\u003c\/li\u003e\n\u003cli\u003eSmall end diameter of 0.5799 inches and large end diameter of 0.7216 inches\u003c\/li\u003e\n\u003cli\u003eSix spiral flutes with right-hand cut for smooth, consistent material removal\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel construction for durability across cast iron, steel, and steel alloy workpieces\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish maintains precise ground tolerances\u003c\/li\u003e\n\u003cli\u003e5\/8-inch square shank for secure drive in standard holders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned to produce standard number 10 taper pin holes in cast iron, steel, and steel alloy workpieces where a 1:48 taper rate is specified.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis reamer should be installed by a qualified machinist familiar with cutting tool setup and speeds-and-feeds selection. Secure the square shank firmly in the appropriate holder before operation and ensure the workpiece is rigidly clamped to prevent movement during reaming. Apply cutting fluid appropriate for the workpiece material to prolong tool life and improve finish quality. Never force the reamer through undersized stock in a single pass; step up progressively from a drilled pilot hole to avoid tool breakage.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper Pin Size\u003c\/strong\u003e: 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall End Diameter\u003c\/strong\u003e: 0.5799 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge End Diameter\u003c\/strong\u003e: 0.7216 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper Rate\u003c\/strong\u003e: 1:48\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 9.3125 inches (9-5\/16 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 6.8125 inches (6-13\/16 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.6250 inches (5\/8 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Direction\u003c\/strong\u003e: Left Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Cast Iron, Steel, Steel Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Application\u003c\/strong\u003e: Hole Enlarging, Hole Finishing, Hole Shaping\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 659\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C24286\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51715860070706,"sku":"C24286","price":287.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/210b8f58e395cdc42b1326ac38c7de9e.jpg?v=1788519122","url":"https:\/\/voomisupply.com\/products\/cleveland-c24286-taper-pin-reamer-size-10-hss","provider":"Voomi Supply","version":"1.0","type":"link"}