{"product_id":"cleveland-c24176-spotting-drill-0-5-in-120-deg-hss","title":"Cleveland C24176 Spotting Drill 0.5 in 120 Deg Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe CLEVELAND C24176 is a single-ended spotting drill designed to create accurate center locations and chamfer entry points before through-hole drilling operations. Built from high-speed steel with a bright uncoated finish, this tool features a 120-degree point angle optimized for locating on flat and curved workpiece surfaces. The 0.5 inch cutting diameter and straight cylindrical shank make it compatible with standard drill chucks and collet holders found on drill presses, CNC machining centers, and manual mills. Machinists, tool and die techs, and general fabricators use this tool when positional accuracy at the drill entry point is critical to finished-hole quality.\u003c\/p\u003e\u003cp\u003eThe C24176 is suited for general-purpose spotting work in ferrous and non-ferrous materials across light to medium production environments. The 120-degree included angle matches common twist drill point geometries, reducing drill walk and improving hole-location consistency. With a 1.5 inch flute length and 3.75 inch overall length, the tool fits standard short-reach toolholding setups in both manual and CNC applications. It is a practical replacement or stocking tool for any shop that drills to close positional tolerances on a regular basis.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e120-degree point angle matches standard twist drill geometry to minimize drill walk\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel construction provides adequate hardness and toughness for general-purpose spotting\u003c\/li\u003e\n\u003cli\u003eBright uncoated finish suitable for use with most common cutting fluids\u003c\/li\u003e\n\u003cli\u003eSpiral flute design with 2 flutes for effective chip clearance\u003c\/li\u003e\n\u003cli\u003eStraight cylindrical shank fits standard chucks and collet systems without adapters\u003c\/li\u003e\n\u003cli\u003eSingle-ended design for consistent, repeatable regrinding when needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose spotting drill for use in standard drill chucks and straight-shank collet holders on drill presses, knee mills, and CNC machining centers requiring a 0.5 inch shank.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and use should be performed by a qualified machinist or tooling technician. Ensure the spindle is fully stopped and the machine is powered down before inserting or removing the tool from any chuck or collet holder. Verify chuck or collet bore matches the 0.5 inch shank diameter before tightening. Apply appropriate cutting fluid for the workpiece material and follow shop-specific speeds and feeds for HSS tooling.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 120 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnded\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2635\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Application\u003c\/strong\u003e: Spotting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C24176\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51700358742322,"sku":"C24176","price":61.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/065f7d6db03a7f7e092e506418e1e18d.jpg?v=1788389368","url":"https:\/\/voomisupply.com\/products\/cleveland-c24176-spotting-drill-0-5-in-120-deg-hss","provider":"Voomi Supply","version":"1.0","type":"link"}