{"product_id":"cleveland-c23852-mechanics-drill-bit-13-32-in-hss","title":"Cleveland C23852 Mechanics Drill Bit 13\/32 in Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C23852 is a mechanics-length twist drill bit designed for general-purpose hole-making in metal fabrication and maintenance applications. Built from high-speed steel (HSS), it measures 13\/32 inch (0.4062 inch decimal) in diameter with an overall length of 4.38 inches and a flute length of 2.81 inches. The 135-degree split point geometry reduces walking on entry, allowing the bit to self-center without a pilot hole. The flatted shank resists rotation in the chuck. Right-hand cut with spiral flutes for efficient chip evacuation. Manufactured to ASME B94.11M standards.\u003c\/p\u003e\n\u003cp\u003eThis bit is suited for drilling cast iron and steel in residential and light commercial service work, production maintenance, and field repair situations. The mechanics-length body — shorter than jobber-length bits — provides added rigidity in tight spaces and reduces deflection in deep-hole applications. It is a single-piece unit packaged individually, appropriate for tool-crib stocking or single-use replacement. Electricians, pipefitters, HVAC technicians, and general maintenance mechanics commonly carry mechanics-length bits for drilling through structural steel, brackets, and enclosures.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e135-degree split point self-centers on entry, reducing bit walking without a center punch\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel construction handles steel and cast iron at typical hand-drill and drill-press speeds\u003c\/li\u003e\n  \u003cli\u003eMechanics length (4.38 inches OAL) provides rigidity and control in confined spaces\u003c\/li\u003e\n  \u003cli\u003eFlatted shank locks securely in standard 3-jaw chucks, preventing slippage under load\u003c\/li\u003e\n  \u003cli\u003eSpiral flutes clear chips efficiently during right-hand rotation\u003c\/li\u003e\n  \u003cli\u003eMeets ASME B94.11M dimensional standard for consistent fitment and interchangeability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose mechanics-length drill bit compatible with standard 3-jaw keyed or keyless drill chucks accepting a 0.4062-inch flatted shank. Suitable for drilling cast iron and steel workpieces per Series 1875R general-purpose specifications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eSecure the flatted shank firmly in the chuck before drilling to prevent slippage. Use cutting fluid or lubricant when drilling steel to extend bit life and improve hole quality. Inspect the cutting edges before each use and replace the bit if chipping or dulling is present, as a degraded point increases heat and can damage the workpiece. Follow applicable shop safety practices and wear eye protection whenever drilling metal.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 13\/32 inch (0.4062 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split Point\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Flatted\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.4062 inch (10.32 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.38 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2.81 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Length Type\u003c\/strong\u003e: Mechanics\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Cast Iron, Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 1875R\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ASME B94.11M\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C23852\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51700542439730,"sku":"C23852","price":18.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/000759bd77ee6238a620dc7e29e4e3f4_18204c18-99d0-494d-9bbf-baa5713e1b87.jpg?v=1788391716","url":"https:\/\/voomisupply.com\/products\/cleveland-c23852-mechanics-drill-bit-13-32-in-hss","provider":"Voomi Supply","version":"1.0","type":"link"}