{"product_id":"cleveland-c23841-15-64-in-mechanics-drill-bit-hss-split-point","title":"Cleveland C23841 15\/64 in Mechanics Drill Bit Hss Split Point","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe CLEVELAND C23841 is a mechanics-length twist drill bit designed for general-purpose hole drilling in metal and cast iron. Built from high-speed steel (HSS), it features a 135-degree split point that starts on contact without walking, reducing the need for a center punch. The flatted shank seats securely in drill chuck jaws to resist slippage under load. At 3.38 inches overall length with a 2.06-inch flute, this bit is sized for compact access in tight workspaces typical of mechanical and field service work. It conforms to ASME B94.11M standards.\u003c\/p\u003e\u003cp\u003eThis bit is suited for use by HVAC technicians, plumbers, electricians, and general mechanical trades drilling through steel, cast iron, and similar ferrous materials. The mechanics-length body keeps the bit rigid and manageable when working inside equipment enclosures, panels, and tight structural assemblies. The spiral flute geometry promotes chip evacuation during drilling. It is packaged individually and sold as a single piece.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e135-degree split point starts on contact, eliminating center-punch prep on most surfaces\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel construction handles ferrous metals including steel and cast iron\u003c\/li\u003e\n\u003cli\u003eFlatted shank prevents rotation in chuck, maintaining positive grip under torque\u003c\/li\u003e\n\u003cli\u003eMechanics length (3.38 inches OAL) provides rigidity in confined work areas\u003c\/li\u003e\n\u003cli\u003eRight-hand cut with spiral flute for efficient chip removal\u003c\/li\u003e\n\u003cli\u003eMeets ASME B94.11M dimensional standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose mechanics-length drill bit compatible with standard 3-jaw keyed and keyless drill chucks accepting a flatted round shank. Primary workpiece materials are steel and cast iron.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eSecure the flatted shank fully in the drill chuck before operation. Use appropriate cutting fluid or cutting oil when drilling hard ferrous materials to extend bit life and improve hole quality. Wear appropriate eye protection per applicable shop safety standards. Inspect the cutting edges before each use and replace if chipped or dull to prevent workpiece damage or bit failure.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size\u003c\/strong\u003e: 15\/64 inches (0.2344 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split Point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Flatted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.2344 inches (5.95 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.38 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2.06 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel, Cast Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 1875R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Length Type\u003c\/strong\u003e: Mechanics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ASME B94.11M\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePieces Included\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C23841\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51709015818546,"sku":"C23841","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/000759bd77ee6238a620dc7e29e4e3f4_a1e6fddf-42d4-4832-a040-63012f1f40e8.jpg?v=1788450032","url":"https:\/\/voomisupply.com\/products\/cleveland-c23841-15-64-in-mechanics-drill-bit-hss-split-point","provider":"Voomi Supply","version":"1.0","type":"link"}