{"product_id":"cleveland-c23837-11-64-in-mechanics-drill-bit-hss-split-point","title":"Cleveland C23837 11\/64 in Mechanics Drill Bit Hss Split Point","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe CLEVELAND C23837 is a mechanics-length twist drill bit designed for general-purpose drilling in metalworking applications. Built from high-speed steel (HSS), it measures 11\/64 inch (0.1719 inch decimal) in diameter with an overall length of 2.88 inches and a flute length of 1.81 inches. The 135-degree split point geometry reduces walking on contact and requires no center punch on most surfaces. The flatted shank seats securely in standard three-jaw chucks. This bit is suited for use by machinists, maintenance technicians, pipefitters, and general trade professionals working with ferrous and non-ferrous metals.\u003c\/p\u003e\u003cp\u003eThe C23837 is rated for drilling cast iron and steel, making it a practical choice for structural, mechanical, and maintenance drilling tasks. Its mechanics length keeps the bit rigid in tight-clearance situations common in equipment repair and machine shop work. Right-hand spiral flutes evacuate chips efficiently during through-hole and blind-hole drilling. The Series 1875R designation identifies this as part of CLEVELAND's general-purpose mechanics drill line. It is sold and packaged as a single piece.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e135-degree split point reduces walking and improves bite on hard surfaces without center punching\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel construction handles steel and cast iron at standard cutting speeds\u003c\/li\u003e\n\u003cli\u003eMechanics length (2.88 inches OAL) provides rigidity in confined work areas\u003c\/li\u003e\n\u003cli\u003eFlatted shank prevents slipping in standard drill chucks\u003c\/li\u003e\n\u003cli\u003eRight-hand spiral flute for efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003eMeets ASME B94.11M standard for twist drill dimensions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose mechanics-length drill bit compatible with any standard three-jaw drill chuck accepting a 0.1719 inch (4.37 mm) flatted shank. Suitable for drilling cast iron and steel workpieces.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis bit is installed and replaced by machinists, maintenance technicians, and trade professionals using standard drill presses, hand drills, or mill setups. Secure the flatted shank fully in the chuck before operation and verify chuck key is removed before starting the spindle. Use appropriate cutting fluid when drilling hardened steel or cast iron to extend tool life and improve hole quality. Inspect the cutting edges for wear or chipping before each use and replace if the split point shows rounding.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 11\/64 inch (0.1719 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split Point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Flatted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1719 inch (4.37 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.88 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.81 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Cast Iron, Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Length Type\u003c\/strong\u003e: Mechanics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 1875R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ASME B94.11M\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePieces Included\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C23837\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51720960639282,"sku":"C23837","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/000759bd77ee6238a620dc7e29e4e3f4_509e20f6-bd16-4d1d-86c6-59b7e63ffd25.jpg?v=1788571503","url":"https:\/\/voomisupply.com\/products\/cleveland-c23837-11-64-in-mechanics-drill-bit-hss-split-point","provider":"Voomi Supply","version":"1.0","type":"link"}