{"product_id":"cleveland-c23834-1-8-inch-mechanics-drill-bit-hss","title":"Cleveland C23834 1\/8 Inch Mechanics Drill Bit Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C23834 is a mechanics-length, high-speed steel twist drill bit designed for general-purpose metal drilling in trade and industrial applications. Built to ASME B94.11M standards, this 1\/8 inch diameter bit features a 135-degree split point that reduces walking and requires no center punch on most surfaces. The flatted shank provides a positive grip in standard three-jaw chucks. At 2.5 inches overall length with a 1.44 inch flute length, it is proportioned for close-quarters drilling where longer jobber-length bits will not fit. Right-hand spiral flutes clear chips efficiently during through-hole and blind-hole work in steel and cast iron.\u003c\/p\u003e\n\u003cp\u003eThis bit is suited for use by machinists, pipefitters, HVAC technicians, and maintenance tradespeople working in tight spaces around ductwork, pipe hangers, equipment enclosures, and structural steel. The mechanics length makes it a practical choice when standard-length bits are too long to seat properly in a drill or when working inside cabinet panels and control enclosures. Primary workpiece materials are steel and cast iron, covering the majority of common metal fabrication and service tasks in mechanical trades.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e135-degree split point reduces drill walking and eliminates need for a center punch on most metal surfaces\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel construction provides durability across repeated use in steel and cast iron\u003c\/li\u003e\n  \u003cli\u003eFlatted shank prevents slipping in three-jaw drill chucks\u003c\/li\u003e\n  \u003cli\u003eMechanics length (2.5 inches OAL) designed for close-quarters drilling\u003c\/li\u003e\n  \u003cli\u003eRight-hand spiral flutes for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eMeets ASME B94.11M standard for drill bit geometry and tolerances\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose mechanics-length drill bit for use in standard three-jaw chucks accepting 1\/8 inch flatted shanks. Primary workpiece materials are steel and cast iron.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists, pipefitters, HVAC technicians, and general maintenance tradespeople. Secure the flatted shank firmly in the chuck before drilling and verify the bit is running true. Always wear appropriate eye protection and secure the workpiece before applying drill pressure. Inspect the cutting edges for wear before each use, as a dull split-point tip will require excessive feed force and may cause workpiece damage or bit breakage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 1\/8 inch (0.1250 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.44 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split Point\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Flatted\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/8 inch (0.1250 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Length Type\u003c\/strong\u003e: Mechanics\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel, Cast Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ASME B94.11M\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 1875R\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C23834\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51699283525938,"sku":"C23834","price":35.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/000759bd77ee6238a620dc7e29e4e3f4_1cc8af1d-a3bf-443f-8bb0-c89c47e5754c.jpg?v=1788374570","url":"https:\/\/voomisupply.com\/products\/cleveland-c23834-1-8-inch-mechanics-drill-bit-hss","provider":"Voomi Supply","version":"1.0","type":"link"}