{"product_id":"cleveland-c16596-cobalt-jobber-drill-bit-6-5-mm","title":"Cleveland C16596 Cobalt Jobber Drill Bit 6.5 Mm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C16596 is a cobalt jobber-length drill bit designed for demanding metal-cutting applications. Built from M42 cobalt high-speed steel with a gold oxide coating, this bit maintains cutting edge integrity at elevated temperatures generated during heavy-duty drilling. The 135-degree split point reduces walking on entry and lowers the thrust needed to initiate a cut. With an overall length of 3.976 inches and a parabolic flute design, it clears chips efficiently across the full depth of cut. Machinists, maintenance technicians, and fabricators working with tough ferrous and non-ferrous materials will find this bit suited to production and repair work alike.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is intended for use in ferrous and non-ferrous metals including cast iron, stainless steel, carbon steel, and non-ferrous alloys. Its M42 cobalt composition and heavy-duty grade rating make it appropriate for shop floor, field fabrication, and maintenance applications where standard high-speed steel bits lose their edge prematurely. The straight-cylindrical shank is compatible with standard three-jaw chucks on drill presses, hand drills, and milling machine setups. It is sold individually and suited for both production drilling and single-task repair scenarios.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM42 cobalt steel construction provides heat resistance and edge retention in hard metals\u003c\/li\u003e\n  \u003cli\u003e135-degree split point reduces bit walking and decreases required entry thrust\u003c\/li\u003e\n  \u003cli\u003eParabolic flute geometry promotes aggressive chip evacuation and reduces packing in deep holes\u003c\/li\u003e\n  \u003cli\u003eGold oxide finish improves lubricity and adds a layer of surface protection\u003c\/li\u003e\n  \u003cli\u003eWeb-thinned tapered web reduces cutting resistance and improves penetration rate\u003c\/li\u003e\n  \u003cli\u003eConforms to ASME B94.11M and DIN 338 standards for consistent dimensional accuracy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for drilling cast iron, non-ferrous metals, stainless steel, and carbon steel. The 0.2559-inch straight-cylindrical shank fits standard three-jaw drill chucks. Conforms to DIN 338 and ASME B94.11M specifications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstall the shank fully into the chuck and tighten securely before operation. Power down and lock out the drill press or machine before changing bits. Use appropriate cutting fluid or coolant when drilling stainless steel or hard alloys to extend tool life, even though this bit does not support coolant-through delivery. Operators should follow applicable OSHA machine guarding and personal protective equipment requirements during use.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 6.5 mm (0.2559 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.976 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2.4803 inches (63.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.500 inches (38.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.2559 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Parabolic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Cobalt (M42 Grade)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\/Coating\u003c\/strong\u003e: Gold Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Grade\u003c\/strong\u003e: Heavy Duty\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: -0.0010 to 0.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ASME B94.11M, DIN 338\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2075\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C16596\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51713701151026,"sku":"C16596","price":32.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3b172c35988b0e3f33a3541674ad0ea5.jpg?v=1788494870","url":"https:\/\/voomisupply.com\/products\/cleveland-c16596-cobalt-jobber-drill-bit-6-5-mm","provider":"Voomi Supply","version":"1.0","type":"link"}