{"product_id":"cleveland-c15895-cobalt-drill-bit-5-64-in-135-deg","title":"Cleveland C15895 Cobalt Drill Bit 5\/64 in 135 Deg","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C15895 is a cobalt jobber-length drill bit designed for drilling into superalloys, stainless steel, and other hard or abrasive materials that defeat standard high-speed steel tooling. Built to Series 3780 specifications, it carries an M42 cobalt steel construction with an oxide coating to reduce friction and extend tool life under high-heat cutting conditions. The drill point is ground to a 135-degree split point angle with web thinning, which reduces thrust and allows self-centering on the workpiece without a center punch in most setups. Overall length is 2 inches with a 5\/64-inch straight-cylindrical shank, making it a direct fit for standard drill chucks and quick-change holders.\u003c\/p\u003e\n\u003cp\u003eThis bit is suited for metalworking and maintenance applications where hardened or high-strength base materials are encountered. Typical users include aerospace and industrial maintenance technicians, pipefitters, and millwrights working with superalloy components, heat-treated fastener holes, or stainless fixtures. The fast spiral flute geometry promotes chip evacuation in deep-hole scenarios common in tight-clearance structural and mechanical assemblies. It meets ASME B94.11M standards and carries a NAS specification designation, making it appropriate for controlled production and MRO environments with documentation requirements.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM42 cobalt steel construction handles superalloy and stainless steel drilling where HSS bits fail\u003c\/li\u003e\n  \u003cli\u003e135-degree split point with web thinning reduces entry thrust and minimizes walking\u003c\/li\u003e\n  \u003cli\u003eOxide coating lowers friction and helps manage heat at the cutting edge\u003c\/li\u003e\n  \u003cli\u003eFast spiral flute design promotes chip clearance in deep or interrupted cuts\u003c\/li\u003e\n  \u003cli\u003eTapered web configuration adds rigidity at the core without sacrificing point geometry\u003c\/li\u003e\n  \u003cli\u003eMeets ASME B94.11M and NAS specification requirements for controlled-use environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a jobber-length drill bit for use in standard drill chucks and compatible quick-change systems accepting a 5\/64-inch straight-cylindrical shank. Primary workpiece material rating is superalloy per manufacturer specification.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use of this drill bit should be performed by qualified machinists or maintenance technicians familiar with metal cutting speeds and feeds for cobalt tooling. Secure the workpiece firmly before drilling and confirm the chuck is properly tightened to prevent shank slippage under load. Coolant-through is not supported on this bit; use an appropriate cutting fluid applied externally to manage heat when drilling hard materials. Do not exceed recommended RPM for the material and bit diameter, as cobalt tooling is brittle under lateral load and can fracture if the drill binds or deflects.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 5\/64 inch (0.0781 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2 inches (50.80 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 11\/16 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 5\/64 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1-5\/16 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral (Fast)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Cobalt Steel M42\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: -0.0005 to 0.0000 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Superalloy\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 3780\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGrade\u003c\/strong\u003e: Heavy Duty\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ASME B94.11M\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpecification Designation\u003c\/strong\u003e: NAS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C15895\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51720929247538,"sku":"C15895","price":55.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/02e10a3a26bea41aaf797649b8e4efcc_418056ba-5318-4523-99ea-a7590e6b3172.jpg?v=1788571093","url":"https:\/\/voomisupply.com\/products\/cleveland-c15895-cobalt-drill-bit-5-64-in-135-deg","provider":"Voomi Supply","version":"1.0","type":"link"}