{"product_id":"cleveland-c14709-cobalt-drill-bit-25-64-in-135-point","title":"Cleveland C14709 Cobalt Drill Bit 25\/64 in 135 Point","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe CLEVELAND C14709 is a screw machine length cobalt drill bit designed for high-performance drilling in tough materials. Built to ASME B94.11M and DIN 1897 standards, this heavy-duty bit features a 135-degree split point that reduces walking and allows faster penetration without a center punch. The M42 cobalt construction resists heat buildup during extended drilling cycles, making it well suited for production environments where bit longevity matters. At 3.25 inches overall length with a 1.875-inch flute and a web-thinned, parallel-web geometry, the C14709 is engineered for rigidity and chip clearance in short-reach applications. Two right-hand spiral flutes evacuate chips efficiently during operation.\u003c\/p\u003e\u003cp\u003eThis bit is sized at 25\/64 inch (0.3906 inch decimal) with a straight-cylindrical shank of matching diameter, making it compatible with standard drill chucks and quick-change tooling. The screw machine length profile keeps the tool short and stiff, which reduces deflection when drilling alloy steels, aluminum, and similar workpiece materials. It is commonly used in machine shops, production drilling, and fabrication environments where accuracy and tool life are priorities. The split point geometry eliminates pre-drilling in most applications on the listed workpiece materials.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM42 cobalt construction for heat resistance and extended tool life in hard and abrasive materials\u003c\/li\u003e\n\u003cli\u003e135-degree split point reduces drill walking and improves hole entry without center punching\u003c\/li\u003e\n\u003cli\u003eWeb-thinned, parallel-web geometry lowers thrust and improves chip flow\u003c\/li\u003e\n\u003cli\u003eScrew machine length (3.25 inches OAL) provides rigidity and minimizes deflection\u003c\/li\u003e\n\u003cli\u003eRight-hand cut with regular spiral flutes for efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003eMeets ASME B94.11M and DIN 1897 standards; ANSI and DIN designation compliance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use on alloy steel and aluminum workpieces. Sized for standard drill chucks and quick-change holders accepting a 0.3906-inch straight-cylindrical shank. Part of the Cleveland Series 2133 heavy-duty screw machine drill line.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and use should be performed by a qualified machinist or tooling technician familiar with metalworking drill applications. Secure the shank fully in the chuck before operation and verify runout is within acceptable tolerance for the application. Use appropriate cutting fluid for the workpiece material to extend tool life and improve finish quality. Inspect the cutting edges before each use and replace the bit if chipping or excessive wear is observed.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size\u003c\/strong\u003e: 25\/64 inch (0.3906 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.25 inches (82.55 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.875 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.375 inches (34.92 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.3906 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Cobalt (M42)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Grade\u003c\/strong\u003e: Heavy Duty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Parallel, Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Length Type\u003c\/strong\u003e: Screw Machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0010 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Alloy Steel, Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2133\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ASME B94.11M, ANSI, DIN 1897\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C14709\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51704020304178,"sku":"C14709","price":26.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b8b313e6e57912baec529c2a4a732ee0.jpg?v=1788420108","url":"https:\/\/voomisupply.com\/products\/cleveland-c14709-cobalt-drill-bit-25-64-in-135-point","provider":"Voomi Supply","version":"1.0","type":"link"}