{"product_id":"cleveland-c12209-taper-shank-drill-bit-21-32-in-2mt-hss","title":"Cleveland C12209 Taper Shank Drill Bit 21\/32 in 2MT Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C12209 is a taper shank drill bit designed for general-purpose drilling in metal, steel, and similar materials. It features a No. 2 Morse taper (2MT) shank for secure mounting in compatible drill presses and machine spindles. The bit is manufactured from high-speed steel (HSS) with an oxide finish that provides corrosion resistance and reduces friction during cutting. At 21\/32 inch (0.6563 inch) in diameter, it is suited for medium-bore hole applications requiring accurate, consistent results. This bit is installed and operated by machinists, tool-and-die workers, and maintenance technicians working with drill presses, lathes, or milling machines equipped with a No. 2 Morse taper socket.\u003c\/p\u003e\n\u003cp\u003eThe C12209 is built for general-purpose production and maintenance drilling operations. Its 118-degree standard point and right-hand spiral flute geometry make it appropriate for a wide range of common ferrous and non-ferrous materials. The web-thinned construction reduces thrust and improves chip evacuation in deeper holes. Typical applications include fabrication shops, maintenance facilities, and machine shops where a reliable, standard-geometry taper shank drill is required in the 21\/32 inch size range.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e21\/32 inch (0.6563 inch) drill diameter with a tight tolerance of +0.0000 to -0.0012 inch for consistent hole sizing\u003c\/li\u003e\n  \u003cli\u003eNo. 2 Morse taper shank for positive, self-holding engagement in compatible spindles and drill sockets\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel construction provides durability and heat resistance during general-purpose metal drilling\u003c\/li\u003e\n  \u003cli\u003eOxide finish reduces surface friction and offers basic corrosion protection\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point with web-thinned geometry to reduce entry thrust and improve chip clearance\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, regular spiral flute with 5-1\/8 inch flute length for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eConforms to ASME B94.11M standards; Series 2410\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard-geometry replacement or production drill bit for machine spindles and drill press quills fitted with a No. 2 Morse taper socket. Suitable for use wherever a 21\/32 inch taper shank drill conforming to ASME B94.11M is specified.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists or maintenance technicians with appropriate machine tool experience. Power down and lock out the machine before seating or removing the taper shank in the spindle socket. Clean both the shank taper and the socket bore before insertion to ensure full contact and prevent fretting. Use a drift key and drift slot to remove the bit safely — never strike the spindle directly.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 21\/32 inch (0.6563 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Taper\u003c\/strong\u003e: 2MT (No. 2 Morse Taper)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 9 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 5-1\/8 inches (5.125 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Thinning\u003c\/strong\u003e: Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0012 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2410\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ASME B94.11M\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C12209\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51719035846962,"sku":"C12209","price":83.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7dbf11dfd75702b5ecc2df24a5258add_05132bd8-4d85-47ec-afef-f6928ac213dd.jpg?v=1788557076","url":"https:\/\/voomisupply.com\/products\/cleveland-c12209-taper-shank-drill-bit-21-32-in-2mt-hss","provider":"Voomi Supply","version":"1.0","type":"link"}