{"product_id":"cleveland-c12194-taper-shank-drill-bit-9-16-in-2mt-hss","title":"Cleveland C12194 Taper Shank Drill Bit 9\/16 in 2MT Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C12194 is a taper shank drill bit designed for drilling precise, clean holes in metal and general-purpose materials. It carries a 9\/16 inch cutting diameter and mounts via a No. 2 Morse Taper (2MT) shank, making it compatible with drill presses, lathes, and milling machines equipped with a matching taper socket. The bit is ground from high-speed steel (HSS) with an oxide finish that provides basic lubricity and surface protection. A 118-degree standard point geometry with web thinning reduces thrust on entry and keeps the bit tracking true. Machinists, maintenance mechanics, and tool-room technicians are the primary users of this type of bit.\u003c\/p\u003e\n\u003cp\u003eThis drill bit suits general-purpose production and maintenance drilling in ferrous and non-ferrous metals, plastics, and similar materials. The 2MT shank seats directly into compatible machine spindles without a chuck, making it well suited for drill press work where rigidity and concentricity are priorities. With a flute length of 4-7\/8 inches and an overall length of 8-3\/4 inches, the C12194 provides adequate reach for most through-hole and deep-hole applications encountered in a standard machine shop or maintenance environment.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e9\/16 inch (0.5625 inch) cutting diameter with a tight tolerance of +0.0000 to -0.0012 inches\u003c\/li\u003e\n  \u003cli\u003eNo. 2 Morse Taper shank seats directly in compatible spindles for rigid, chuckless setup\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel construction handles general-purpose drilling in metal and non-metal materials\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point with web thinning reduces entry thrust and improves centering\u003c\/li\u003e\n  \u003cli\u003eOxide finish provides surface lubricity and corrosion resistance during storage and use\u003c\/li\u003e\n  \u003cli\u003eRight-hand spiral flute with regular helix efficiently clears chips during drilling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in drill presses, lathes, and milling machine spindles equipped with a No. 2 Morse Taper socket. Meets ASME B94.11M dimensional standards for taper shank drill bits.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists or maintenance mechanics. Clean both the taper shank and the spindle socket thoroughly before seating to ensure full contact and prevent slippage under load. Use a drift and knockout bar through the spindle slot to remove the bit — do not strike the flutes or the cutting edge. Always power down and lock out the machine before changing tooling.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 9\/16 inches (0.5625 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0012 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Taper\u003c\/strong\u003e: 2MT (No. 2 Morse Taper)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard with web thinning\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 4-7\/8 inches (4.875 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 8-3\/4 inches (8.750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular Helix\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2410\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ASME B94.11M\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C12194\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51695473361202,"sku":"C12194","price":77.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7dbf11dfd75702b5ecc2df24a5258add_90724ba6-de7b-413e-b64d-9911bd1f8481.jpg?v=1788335467","url":"https:\/\/voomisupply.com\/products\/cleveland-c12194-taper-shank-drill-bit-9-16-in-2mt-hss","provider":"Voomi Supply","version":"1.0","type":"link"}