{"product_id":"cleveland-c12186-taper-shank-drill-bit-33-64-in-2mt-hss","title":"Cleveland C12186 Taper Shank Drill Bit 33\/64 in 2MT Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C12186 is a taper shank drill bit designed for metal drilling in machine shop and production environments. Built from high-speed steel with an oxide finish, it accepts a No. 2 Morse Taper (2MT) shank for direct mounting in compatible drill press spindles, lathes, and milling machine quills. The bit cuts at a 118-degree standard point angle with a right-hand spiral flute and web-thinned tip, reducing thrust on entry and improving chip evacuation. At 8.5 inches overall length with a 4.625-inch flute length, it handles moderate-depth holes with good rigidity. Machinists, tool-and-die makers, and maintenance technicians are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis bit is suited for general-purpose drilling in ferrous and non-ferrous metals, plastics, and similar materials on drill presses, lathes, and machining centers equipped with a No. 2 Morse Taper socket. The 33\/64-inch (0.5156-inch) diameter is a common production size used when a close-tolerance through-hole is required before reaming or threading. The regular spiral flute geometry handles a broad range of materials and feed rates, making this bit a practical choice for job shop and maintenance drilling applications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-speed steel construction for durability across ferrous and non-ferrous materials\u003c\/li\u003e\n  \u003cli\u003eNo. 2 Morse Taper shank for direct, self-holding fit in compatible machine spindles\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle for general-purpose metal drilling\u003c\/li\u003e\n  \u003cli\u003eWeb-thinned tip reduces cutting thrust and improves penetration efficiency\u003c\/li\u003e\n  \u003cli\u003eOxide finish provides mild lubricity and corrosion resistance during storage\u003c\/li\u003e\n  \u003cli\u003eRight-hand regular spiral flute promotes consistent chip clearing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose replacement or production taper shank drill bit for any machine spindle or drill sleeve accepting a No. 2 Morse Taper (2MT) interface. Conforms to ASME B94.11M standards.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists or maintenance technicians. Power down and lock out the machine before inserting or removing the taper shank. Clean both the shank taper and the spindle socket thoroughly before seating to ensure full contact and prevent slippage under load. Use a drift and knockout bar to remove the bit from the spindle — never strike the bit directly.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size\u003c\/strong\u003e: 33\/64 inches (0.5156 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0012 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 8.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 4.625 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Taper\u003c\/strong\u003e: 2MT (No. 2 Morse Taper)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Thinning\u003c\/strong\u003e: Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral (Regular)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2410\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ASME B94.11M\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C12186\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51706158219570,"sku":"C12186","price":74.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7dbf11dfd75702b5ecc2df24a5258add_bd4c8da5-02ab-4d5f-b320-36320a3e0dff.jpg?v=1788432974","url":"https:\/\/voomisupply.com\/products\/cleveland-c12186-taper-shank-drill-bit-33-64-in-2mt-hss","provider":"Voomi Supply","version":"1.0","type":"link"}