{"product_id":"cleveland-c11683-jobber-drill-bit-no-29-hss-135-deg","title":"Cleveland C11683 Jobber Drill Bit No 29 Hss 135 Deg","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CLEVELAND C11683 is a jobber-length drill bit sized to wire gauge No. 29 (0.1360 inches decimal), designed for general-purpose drilling in production and maintenance environments. Built from high speed steel with a bright uncoated finish, it features a 135-degree split point that reduces walking on contact, minimizing the need for a center punch on flat stock. The heavy-duty grade construction and web-thinned, tapered web geometry promote clean chip evacuation through the two-flute spiral design. Licensed HVAC, mechanical, and sheet-metal contractors, as well as maintenance technicians, reach for this size when drilling pilot holes and clearance holes in light-gauge materials.\u003c\/p\u003e\n\u003cp\u003eThe C11683 is particularly well suited for drilling aluminum and similar non-ferrous or light ferrous materials where a sharp, self-centering point and consistent diameter tolerance are critical. With an overall length of 2.875 inches and a flute length of 1.750 inches, it fits standard three-jaw chucks on benchtop drill presses, handheld power drills, and drill motors used in fabrication shops and field service. The straight-cylindrical shank at 0.1360 inches diameter seats securely in keyless and keyed chucks alike. This bit meets NAS 907 Type B standards, making it appropriate for applications where a recognized specification is required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eWire gauge No. 29 size at 0.1360 inches decimal diameter with tight tolerance of -0.0007 to 0.0000 inches\u003c\/li\u003e\n  \u003cli\u003e135-degree split point self-centers on contact, reducing drill walk without a center punch\u003c\/li\u003e\n  \u003cli\u003eWeb-thinned, tapered web geometry improves chip flow and lowers thrust requirements\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction handles intermittent and continuous drilling duty\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish allows direct visual inspection of edge wear during service\u003c\/li\u003e\n  \u003cli\u003eMeets NAS 907 Type B specification for standardized performance requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard straight-shank drill chucks on handheld drills, drill presses, and CNC drilling equipment. Primary workpiece material compatibility is aluminum per the manufacturer specification; suitable for other non-ferrous and light ferrous stock at appropriate speeds and feeds.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstall this bit in a properly sized keyless or keyed chuck, tightening fully at all three chuck positions to prevent slippage under load. Disengage power and lock out the drill press or tool before changing bits. Match spindle speed to material and bit diameter using a standard speeds-and-feeds reference for high speed steel; running too fast in hard materials will shorten edge life significantly. Eye protection and chip guarding are required per standard shop safety practices.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Wire)\u003c\/strong\u003e: No. 29\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Decimal Inch)\u003c\/strong\u003e: 0.1360 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.875 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.750 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1360 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Bright \/ Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Grade\u003c\/strong\u003e: Heavy Duty\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: -0.0007 to 0.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: NAS 907 Type B\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2222\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CLEVELAND\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C11683\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CLEVELAND CONTROLS","offers":[{"title":"Default Title","offer_id":51711974277426,"sku":"C11683","price":43.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6001875504eac3f350be9c96fcab6a2d.jpg?v=1788482104","url":"https:\/\/voomisupply.com\/products\/cleveland-c11683-jobber-drill-bit-no-29-hss-135-deg","provider":"Voomi Supply","version":"1.0","type":"link"}